Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 35
  1. Collapse Details
    #11
    Join Date
    Dec 2010
    Location
    Atlanta, Ga.
    Posts
    8,188
    Post Thanks / Like
    Contribute If you enjoy reading the
    content here, click the below
    image to support our site.
    Click Here To Contribute To Our Site
    What are the l.o. frequencies of the lnbs? You have several different ones listed in your settings. There should be only 3 lnb types for our fta:
    C Band = 5150
    Universal = 9750/10600
    Circular = 10750
    Reply With Quote
     

  2. Collapse Details
    #12
    Join Date
    Dec 2010
    Location
    Atlanta, Ga.
    Posts
    8,188
    Post Thanks / Like
    I also need the satellites.xml file that you are using with these settings. Please send it.
    .
    .
    .
    Meine Dreambox One ist ein Stück Scheiße!.
    Reply With Quote
     

  3. Collapse Details
    #13
    Join Date
    May 2012
    Posts
    258
    Post Thanks / Like
    I have several stacked lnb's. One I use I set it for 13850 so the H freq are correct and the V are off...use it for SES3 NBC...I actually fixed that one just now by changing it to 10750 and adjusting the freq of the H tps. Now that slot works!

    i think it is in the communication between receiver and switch by 2.0. I think in that communication the switch sees the LO and the TPs from the database..it then calculates if that is correct or not and turns the 22 on or off to compensate.
    seems it is all on the stacked lnbs....so it is the switch compensating somehow...
    Reply With Quote
     

  4. Collapse Details
    #14
    Join Date
    Dec 2010
    Location
    Atlanta, Ga.
    Posts
    8,188
    Post Thanks / Like
    I guess what we need is this:
    A settings file with all satellites deleted except for the satellites used by the problem switch.
    A list of lnbs that are used with this switch and the proper l.o. frequencies (please include lnb make/model).
    The exact satellites.xml file that is being used with this switch.

    I think we can get it to work properly. Am just having a very hard time understanding the settings file without knowing what is supposed to be controlled by it.
    .
    .
    .
    Meine Dreambox One ist ein Stück Scheiße!.
    Reply With Quote
     

  5. Collapse Details
    #15
    Join Date
    May 2012
    Posts
    258
    Post Thanks / Like
    xml
    Attached Files Attached Files
    Reply With Quote
     

  6. Thanks el bandido thanked for this post
  7. Collapse Details
    #16
    Join Date
    Dec 2010
    Location
    Atlanta, Ga.
    Posts
    8,188
    Post Thanks / Like
    Your settings file breaks down like this:


    lnb=1 lnb.1.lof=c_band
    2230.tonemode=off
    2250.tonemode=off
    2270.tonemode=off
    2290.tonemode=off
    2330.tonemode=off
    2350.tonemode=off
    2370.tonemode=off
    2390.tonemode=off
    2410.tonemode=off
    2432.tonemode=off
    2470.tonemode=off
    2489.tonemode=off
    2550.tonemode=off
    2590.tonemode=off
    2630.tonemode=off
    2650.tonemode=off
    2669.tonemode=off
    2690.tonemode=off
    2710.tonemode=off
    2730.tonemode=off
    2770.tonemode=off
    2820.tonemode=off
    2880.tonemode=off
    2990.tonemode=off
    3019.tonemode=off
    3030.tonemode=off



    lnb=2
    2329.tonemode=on
    2369.tonemode=on
    2431.tonemode=on
    2451.tonemode=on
    2469.tonemode=on
    2488.tonemode=on
    2526.tonemode=on
    2549.tonemode=on
    2589.tonemode=on
    2610.tonemode=on
    2668.tonemode=on
    2709.tonemode=on
    2750.tonemode=on
    2769.tonemode=on
    2879.tonemode=on
    3300.tonemode=on




    lnb=3 lnb.3.lof=c_band
    2527.tonemode=off
    2608.tonemode=off


    lnb=4
    2349.tonemode=on



    lnb=5 lnb.5.lof=circular_lnb
    2389.tonemode=off


    lnb=6 lnb.6.lof=user_defined = 13850
    2569.tonemode=on

    lnb=7 lnb.7.lof=circular_lnb
    2629.tonemode=on

    lnb=8
    2729.tonemode=on

    lnb=9 lnb.9.lof=circular_lnb
    2649.tonemode=on

    lnb=10 lnb.10.lof=user_defined = 10750

    2689.tonemode=off

    lnb=11 lnb.11.lof=c_band
    2570.tonemode=off

    lnb=12 lnb.12.lof=circular_lnb
    2409.tonemode=off






    END
    Reply With Quote
     

  8. Thanks mountaineer thanked for this post
  9. Collapse Details
    #17
    Join Date
    Dec 2010
    Location
    Atlanta, Ga.
    Posts
    8,188
    Post Thanks / Like
    Notice that lnbs 2,4, and 8 are not defined?
    You have all of this running through one switch????
    Reply With Quote
     

  10. Thanks mountaineer thanked for this post
  11. Collapse Details
    #18
    Join Date
    Dec 2010
    Location
    Atlanta, Ga.
    Posts
    8,188
    Post Thanks / Like
    lnbs 2,4,8 are universal, and you are running them with 22KHz ON. Are the non-working satellites on these switches? (Subtract the orbit positions in the post#16 list from 3600 to get the correct orbit listing. I.E. 3600−2409 = 1191, Or 119.1 West)

    Have you tried using Band for the 22KHz tone setting with the universal lnbs? The 22KHz tone will come on automatically for anything above 11700 MHz when Band is selected.

    Have you tried using Diseqc 1.1 commands to control the 8 positions in this diseqc switch?

    Have you tried using ToneBurst A and ToneBurst B in series with other Diseqc 1.0 settings?
    .
    .
    .
    Meine Dreambox One ist ein Stück Scheiße!.
    Reply With Quote
     

  12. Thanks mountaineer thanked for this post
  13. Collapse Details
    #19
    Join Date
    Dec 2010
    Location
    Atlanta, Ga.
    Posts
    8,188
    Post Thanks / Like
    Looks like there are 3 lnbs assigned to each Diseqc 1.0 port.

    lnb.1.commitedDiseqcCommand=AB (port 2)
    lnb.2.commitedDiseqcCommand=AB (port 2)
    lnb.3.commitedDiseqcCommand=AA (port 1)
    lnb.4.commitedDiseqcCommand=AA (port 1)
    lnb.5.commitedDiseqcCommand=BB (port 4)
    lnb.6.commitedDiseqcCommand=BB (port 4)
    lnb.7.commitedDiseqcCommand=BA (port 3)
    lnb.8.commitedDiseqcCommand=AA (port 1)
    lnb.9.commitedDiseqcCommand=AB (port 2)
    lnb.10.commitedDiseqcCommand=BA (port 3)
    lnb.11.commitedDiseqcCommand=BA (port 3)
    lnb.12.commitedDiseqcCommand=BB (port 4)

    E2 Diseqc Commands =
    Sat1........A/A
    Sat2........A/B
    Sat3........B/A
    Sat4........B/B

    (Note: The switch is only designed for 8 lnbs Max.)
    Reply With Quote
     

  14. Thanks mountaineer thanked for this post
  15. Collapse Details
    #20
    Join Date
    May 2012
    Posts
    258
    Post Thanks / Like
    Yes I have tried toneburst to no effect.

    i think the issue is that diseqc 3 and 4 containing inputs 9-16 is designed for quatro lnbs. I have stacked individual lnbs on those. I use H for one whole sat and V for another whole sat...in my dish farm. What is happeneing is that because the switch/multiswitch is Diseqc 2.0 it is testing signal and seeing range of lnbs and changing its own settings based on what it is "hearing" from the lnb's. What I mean is that it detects the wider range of the stacked lnb's and assumes they are universal and tries to adjust its 22 settings accordingly. This overrides the "normal" settings in the switch. SO it turns on 22 for certain ports and off based on what it thinks is the configuaration.

    Now this does not happen with 1 and 2 and their ports 1-8...they are designed to be used with dual or quattro lnbs. So it seems to leave those alone with the stacked lnb's..I think

    So my setup as of now is the following

    Command V/H 22 sat
    1 V off 107.3 Cband (V only) Regular Cband LNB STATIONARY CBAND DISH
    1 H Off 99 W Cband H only reg Cband Lnb STATIONARY CBAND DISH
    1 V ON 125 KU V Only UNiversal LNB set to universal setting
    1 H ON 87 KU H only UNiversal LNB set to universal setting
    NUMBER1 all work correctly

    2 V Off 97 Cband Reg Cband LNB MOVEABLE CBAQND DISH
    2 H Off 97 Cband Reg Cband LNB MOVEABLE CBAND DISH
    2 V ON KU Moveable Dish V Only Universal LNB Set to universal MOVEABLE KU DISH
    2 H ON 95 KU STACKED KU LNB 10750 LO

    2 All work correctly

    3 V OFF 91 KU STACKED KU LNB LO set 10750
    3 H OFF 103 Cband STACKED CBAND LNB 5150 LO set
    3 V ON 97 KU STACKED KU LNB LO set 10750
    3 H ON EMPTY

    91 ku AND eMPTY DO NOT WORK CORRECTLY 22 TONE IS WRONG AND DOESNT ALLOW ACCESS TO PORTS.


    4 V off 119 KU 10750 LO (special 118 and 119 LNB)
    4 H OFF 119 KU 10750 LO (special 118 and 119 LNB)
    4 V ON 121 KU STACKED LNB Set 10750 LO
    4 H ON 103 KU STACKED LNB Set 10750 LO


    119 ku ports do not work as 22 is stuck ON on all ports.

    I have one stationary Cband dish with 2 lnbs on it...I take the H from one and the V from the other because the channels I want are only on thos polarities (99 H 107.3 V)
    I have a moveable Cband Dish
    Reply With Quote
     

  16. Thanks el bandido thanked for this post
Page 2 of 4 FirstFirst 1234 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •