Here is a screencap of the SX88 channel file inserted into the SF4008:
[Only registered and activated users can see links. ]
The channel names or numbering is a bit different for the SX88. I prefer the format of channel names that the SF4008 generates.
Attached is a satellites.xml file that was partially made using the SX88. I deleted all of the transponders for the c band satellites from 87 West to 135 West, and blindscanned each c band satellite. Doing this makes a decent satellites.xml file.
I also install the satellites.xml in the etc/enigma2 folder of the SF4008 so it will not be written over if I decide to online update the image.
Results 201 to 210 of 282
-
12-14-2017,09:37 PM
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Asseastof111 thanked for this post
-
12-14-2017,09:55 PM
I added a scan for lamedb transponders which only scans the transponders that are logged in the lamedb channel file. This feature cleans up after scanning for feeds, and it saves time as compared to rescanning all transponders.
[Only registered and activated users can see links. ]
Now my channel names are fixed...
[Only registered and activated users can see links. ]
-
Post Thanks / Like - 2 Thanks, 0 Likes, 0 Kiss My Asseastof111, mountaineer thanked for this post
-
-
Post Thanks / Like - 2 Thanks, 0 Likes, 0 Kiss My Assmountaineer, eastof111 thanked for this post
-
12-27-2017,09:07 PM
Thanks EB, there is something wrong with the ATV 6.1, after re-booting it gets stuck on booting, had to change the image to VIX for now and installing SatDreamGr on multiboot and see how it behaves.
Regards.
Chewie
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Assmountaineer thanked for this post
-
12-28-2017,12:20 PM
Post a debug log using telnet and we will look at what is causing the receiver to hang.
-
12-28-2017,07:09 PM
Hello EB
I installed the SatdrewamGr new image and is doing the same thing as the ATV image, It gets stuck on booting I have to install a new Image to get it going again, I install a previous image of the SatdreamGr without the new driver and no issues.
I don't know how to get the debug log, I am sure I am not the only one with this problem.
Hope they fix this soon.
Regards.
Chewie
-
12-28-2017,07:23 PM
The new driver did not show up in SatDreamGr image until a few hours ago.
Here is what my update log shows:
Configuring enigma2-plugin-extensions-mediascanner.
Configuring enigma2-plugin-extensions-pictureplayer.
Configuring enigma2.
Configuring kernel-module-linuxtv.
Configuring nextv-v3ddriver-sf4008.
Configuring platform-util-sf4008.
Adding system startup for /etc/init.d/platform-util.
Configuring octagon-dvb-modules-sf4008.
Configuring enigma2-plugin-systemplugins-fastscan.
Configuring enigma2-plugin-systemplugins-hotplug.
Configuring enigma2-plugin-systemplugins-cablescan.
Configuring enigma2-plugin-systemplugins-wirelesslan.
Configuring enigma2-plugin-systemplugins-osd3dsetup.
Configuring enigma2-plugin-extensions-cutlisteditor.
Configuring enigma2-plugin-systemplugins-positionersetup.
Configuring enigma2-plugin-systemplugins-videomode.
Configuring enigma2-plugin-systemplugins-softwaremanager.
Configuring enigma2-plugin-systemplugins-osdpositionsetup.
Configuring enigma2-plugin-extensions-mediaplayer.
Configuring enigma2-plugin-systemplugins-hdmicec.
Configuring enigma2-plugin-systemplugins-skinselector.
Configuring enigma2-plugin-extensions-graphmultiepg.
Configuring enigma2-plugin-systemplugins-satfinder.
Configuring enigma2-plugin-systemplugins-videotune.
root@sf4008:~# reboot
Broadcast message from root@sf4008 (pts/0) (Thu Dec 28 20:19:24 2017):
The system is going down for reboot NOW!
root@sf4008:~#
-
12-28-2017,07:32 PM
OK.
Mine is stuck on booting....
Let's see if we can find out why...
-
-
12-28-2017,08:37 PM
Thanks EB, I stared all over with previous image.
Regards.
Chewie
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Assel bandido thanked for this post