I have this receiver. It is a dual tuner ali chip box. Does anyone know more about this box ....I have searched and searched nd can find precious little about the true specs. It does AC 3 Dolby DIgital, AAC, 16apsk. Really a decent little receiver.But the sat list is terrible and must be added in manually by remote. I need to find a channel editor for it. Any help is greatly appreciated. Thanks guys!
i have tried all of the ali editors I can get my hands on and they all are "off" on the names of the channels ...much like they act with jynxbox files. I have attached a udf file renamed to .doc. Just rename it .udf.
Thread: azbox bravissimo
Results 1 to 10 of 14
-
azbox bravissimo – 04-13-2016,07:40 PM
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Assel bandido thanked for this post
-
04-14-2016,08:13 PM
As you probably know,
The azbox bravissimo was a box designed for theft more than anything else. It is not an AzBox made by the original AzBox company. Many of these boxes were destroyed in South American raids. Very little if any support exists for this box.
-
Post Thanks / Like - 2 Thanks, 0 Likes, 0 Kiss My AssViP3R, mountaineer thanked for this post
-
04-24-2016,07:17 AM
Yes I read that stuff.. I live in US and have no use for stealing anything nor those that practice it. But I do like the box in that it is a dual tuner that can be had for $50. It also does 16apsk which with the mux open now on G 19 makes it very nice. I do like this box but am looking for all the tools such as a channel editor. Any help is appreciated.
Thanks guys!
-
Post Thanks / Like - 1 Thanks, 1 Likes, 0 Kiss My AssViP3R thanked for this postel bandido liked this post
-
04-24-2016,07:32 AM
You will need to find an Ali editor that supports dual tuners. Plus you should find the recovery software before you try any editor. Ali is bad about bricking when the sat/channel file is altered.
-
Post Thanks / Like - 2 Thanks, 0 Likes, 0 Kiss My AssViP3R, mountaineer thanked for this post
-
04-24-2016,08:28 AM
You are right there I have already used the recover tools etc. Even changed the Bravissimo into a tocom free box. But still no editor to be found. There supposidly was one but all links are dead . thanks!
-
-
04-24-2016,11:46 AM
It goes by different names but I think that is one that they mentioned..I think I tried it..or atleast one that was out there....if you have a link or somewhere to download the one you are talking about I would be very thankful. Thanks!
-
04-24-2016,12:12 PM
I hope it helps.
click click b00m
-
Post Thanks / Like - 2 Thanks, 0 Likes, 0 Kiss My AssCostactc, el bandido thanked for this post
-
04-24-2016,05:38 PM
Thank you Vip3r. I downloaded it and tried it to no avail. Same as others...sat names are right and perfect...channel names are either characters or blank...no audio pids etc. I wonder if there is a special script.ini that you have to load to get the charcter count correct? I tried using serial and saved .udf file...both gave the same result.
I am open to more help and guidance.
Thanks guys!
-
04-24-2016,10:01 PM
Can you alter the sat names with that editor? Does it still work correctly after doing that?