ATSC For Enigma2 (TEST)

[eastof111]

"The lamedb file in post #73 should work correctly. Check it and see. Try using only the Terrestrial and Cable folders that the receiver creates."

That's the one I am using. Maybe I missed something, but the receiver never created terrestrial or cable folders at my end. I've had to create the bouquets manually. Will play with the tuner settings tomorrow.

[el bandido]

Post the enigma2 folder located in etc (etc/enigma2). Remove the settings file from enigma2 before posting IF you have made any logins with the receiver to facebook or any other site that requires a password.

[eastof111]

Looks like I will resume using ATV with Sundtek for a while longer. Timer recordings of fta and atsc have always worked flawlessly, except of course for the Sundtek glitching.

Satdreamgr still has a timer recording problem. It has disabled timer recordings, both fta and atsc on four occasions prior to completion of the recordings. Plus, on occasion, the time has to be corrected and updated for no reason. Usually takes a few cold boots to correct this problem. Even with the NTP time set to correct itself every five minutes, it's usually of by 45+ seconds. With ATV the time is always right on (+ or - 2 seconds). I will wait until they correct this time/timer problem along with having not to install the opkg's for Wintv.

I do like the fact that re-flashing Satdreamgr will automatically update prior settings, thus. saving time.

[el bandido]

Something is not loading correctly from what you have written. System Time seems to works correctly for me and is accurate. Your ATSC problems or issues cannot be fixed easily without providing information or files needed to replicate them. Other images such as OpenATV should have ATSC at some point in the future. We will wait and see what happens. EB

[eastof111]

Here's a new one I have not experienced before with over night recordings of atsc channels. I would guess this error to be a sat uplink or downlink problem rather than the tv station or atsc tuner.

[el bandido]

What skin is that, and which device are you using for ATSC?

[eastof111]

PD1LOI-Full-HD with Sundtek. We had very heavy thunderstorms and lightning the night of the recording. Some places received two to three inches of rain within an hour, so that may have been a contributing factor.

[eastof111]

Glad to see OpenATV added the Hauppauge driver.

[el bandido]

ATSC support now avalable in Open PLi.

[Only registered and activated users can see links. ]


[Only registered and activated users can see links. ]

Channels scan and play without any issues!

[eastof111]

Nice! Does OpenPli differentiate when using the Sundtek and WinTV and allow using them independently without modifying the lamedb?