This morning I was playing around with the KU LNB settings in the openvix image on the Vu+ Solo2, default was LOF/L 9750, LOF/H 10750, threshold 11700. The channel frequencies are off by 990 MHZ as per lyngsat listings.
My setup is a corotor 11 C/KU plus . The Ku lnb is a Precision PMJ-LNB ku h/s, stability 500KHZ noise at.6 db turned on or off by a tone switch. I set the LO/L to 10.750 and the LOF/H to 10.750 with threshold at 11700. Rescanned 103 KU AMC 1 and MS10, MS20 came in at 11940 MHZ V 20000 3/4 qpsk. I don't fully understand these settings. Did some reading on here that EB posted, determined that my lnb was a standard not universal. Getting on the right track.