Yes i am
Thread: Blindscan
Results 21 to 30 of 80
-
04-22-2015,02:03 PM
-
04-22-2015,02:12 PM
It should work if everything is set correctly.
What message do you get after a ku blindscan? What is the make/model of the universal lnb?
-
-
04-22-2015,03:18 PM
It looks like it is finding transponders, just not any channels on them.
Try a blindscan, but use the save to .xml option in the blindscan menu. Then zip and post the .xml file. It will be located in the /tmp folder of the receiver. The transponder information may tell us what is wrong.
-
04-22-2015,03:37 PM
I haven't attempted ku band with my solo2 but I have noticed on many sats that blind scan will not find all tp but they scan in manually but make sure your info for the tp is correct like dvb-s and dvb-s2 with fec and qpsk or 8psk.
-
-
04-22-2015,07:02 PM
How strong is FNX? I get about 13.8 db/snr on that transponder.
My blindscan got 9 transponders and 19 free tv channels. A copy of the scanned transponders is attached.
Check the lnb installation. I think your receiver is working OK, just need to check the antenna hardware.
You may reinstall the 10750 lnb and test it using the universal settings. The blindscan should still work with the 10750 lnb but the transponders will be 150 MHz off. Use 11700 for the lower blindscan frequency or else it will scan the 10750 l.o. twice, giving you duplicate channels.
-
04-23-2015,12:46 PM
I hooked back up to my Dr-D15 and it found 7 tps with 12.8 db so antenna settings are good.
-
04-23-2015,02:11 PM
Did you connect the Dr-D15 to the exact same coax as the Solo2? Remove one receiver and replace it with another using the exact same antenna connections?
12.8 db on what transponder? What is the signal strength of the Solo2 on the same transponder???
-
04-23-2015,05:50 PM
Yes and Yes transponder 12180 on Dr-D15 12.8 db and 12180 on solo2 13.0 db using the same cable