Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 37
  1. Collapse Details
    #21
    Join Date
    Dec 2010
    Location
    Atlanta, Ga.
    Posts
    8,188
    Post Thanks / Like
    Contribute If you enjoy reading the
    content here, click the below
    image to support our site.
    Click Here To Contribute To Our Site
    Let me try to clarify a bit.
    Set all the satellites up at once. Each satellite has its on page. Configure one satellite, then use the left or right arrows to move to the next satellite. Configure the next satellite and repeat...etc. When finished configuring all satellites, then press the green button or press OK to save and exit.
    You may return after saving and exiting at a later time, and add or delete satellites using the same sequence.
    Reply With Quote
     

  2. Collapse Details
    #22
    Join Date
    Apr 2015
    Posts
    39
    Post Thanks / Like
    Oooh.. Ok. absolutely E2 is other planet..lol
    When I am confirming : Yes I want to configurate DBV-S2 tuner I have the oportunity to configurate/change/erase etc etc in all required satellites when I am finished the"green" button is saving all my Changes. If I want to Change something on my configuration I need to start again on configuration Tuner DBV-S2 confirmation.. correct?
    thanks
    Reply With Quote
     

  3. Collapse Details
    #23
    Join Date
    Dec 2010
    Location
    Atlanta, Ga.
    Posts
    8,188
    Post Thanks / Like
    Correct.
    E2 is not bad Once you learn it!
    Reply With Quote
     

  4. Collapse Details
    #24
    Join Date
    Feb 2011
    Posts
    241
    Post Thanks / Like
    A bit off topic: Is openvix-Apollo.166-vusolose_usb.zip good for Amiko 8900 ?
    Nihil sine Deo !
    Reply With Quote
     

  5. Collapse Details
    #25
    Join Date
    Dec 2010
    Location
    Atlanta, Ga.
    Posts
    8,188
    Post Thanks / Like
    vusolose = Vu+ Solo SE.
    Vu+ Solo SE images will not work on Amikos unless modified for the receiver.
    .
    .
    .
    Meine Dreambox One ist ein Stück Scheiße!.
    Reply With Quote
     

  6. Collapse Details
    #26
    Join Date
    Apr 2015
    Posts
    39
    Post Thanks / Like
    Hello. I have scaned some satellites but I have troubles to scan others
    I think that the problem is basically to configurate my switch 4x4 (ON / OFF)
    3 satellites on side "ON "works perfectly but My satellites on switch OFF is not detecting the LNB ( no channels)
    On my configuration below How I can switch to "OFF" and configurate my switch 4x4
    This is my current settings on my "ON" scaned satellite:

    Config Mode: Advanced
    Satellite: 40.5 W
    LNB: LNB1
    Priority: Auto
    Lof: C band
    Voltaje Mode: Polarization
    Increased Voltaje: No
    Tone Mode: ON
    Disecq Mode 1.1
    Fast Disecq: No
    Tone Burst: None
    Disecq 1.0 Comand : None
    Disecq 1.1 comand: Input 1
    Disecq 1.1 repeat: Three
    sequence repeat: No

    Another Question: If 2 satellites are going to the same Input command. Not problem If I put the same Input number?
    example:
    Disecq 1.1 comand: Input 1 (satellite 40.5W switch 4x4 ON)
    Disecq 1.1 comand: Input 1 (satellite 58W switch 4x4 OFF)
    thanks in advance
    Reply With Quote
     

  7. Collapse Details
    #27
    Join Date
    Dec 2010
    Location
    Atlanta, Ga.
    Posts
    8,188
    Post Thanks / Like
    What kind of lnbs do you have connected to the Off side of the switch?
    Reply With Quote
     

  8. Collapse Details
    #28
    Join Date
    Apr 2015
    Posts
    39
    Post Thanks / Like
    Quote Originally Posted by el bandido View Post
    What kind of lnbs do you have connected to the Off side of the switch?
    lnb ku linear std, lnb c band
    Reply With Quote
     

  9. Collapse Details
    #29
    Join Date
    Dec 2010
    Location
    Atlanta, Ga.
    Posts
    8,188
    Post Thanks / Like
    Config Mode: Advanced
    Satellite: 40.5 W
    LNB: LNB1
    Are you using other LNB numbers besides LNB1?
    Reply With Quote
     

  10. Collapse Details
    #30
    Join Date
    Apr 2015
    Posts
    39
    Post Thanks / Like
    Yes. 8 satellites (kU/C band)..All LNB's Dual Legacy.. Not motorized set up
    every LNB (satellite) going to==>> switch 4x4 (0/22khz ON/OFF) going to==>> switch disecq 1.1 going to==>> VU+solo SE HD.
    I would how configurate switch 4x4. (ON/OFF)..
    Reply With Quote
     

Page 3 of 4 FirstFirst 1234 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •