Page 4 of 4 FirstFirst 1234
Results 31 to 37 of 37
  1. Collapse Details
    #31
    Join Date
    Dec 2010
    Location
    Atlanta, Ga.
    Posts
    8,188
    Post Thanks / Like
    Contribute If you enjoy reading the
    content here, click the below
    image to support our site.
    Click Here To Contribute To Our Site
    Your 4 x 4 on/off is 22KHz on/off.

    Your settings file will explain how you have configured your system.
    If you have not logged into Facebook or any other website using the receiver that requires a password, Then post your settings file in etc/enigma2.
    Reply With Quote
     

  2. Collapse Details
    #32
    Join Date
    Apr 2015
    Posts
    39
    Post Thanks / Like
    Quote Originally Posted by el bandido View Post
    Your 4 x 4 on/off is 22KHz on/off.

    Your settings file will explain how you have configured your system.
    If you have not logged into Facebook or any other website using the receiver that requires a password, Then post your settings file in etc/enigma2.
    Yes, my switch 4x4 is 22KHZ on/off
    sorry, .. What means? "Then post your settings file in etc/enigma2"...???
    I dont understand, could you explain, please..:"If you have not logged into Facebook or any other website using the receiver that requires a password"..???
    I just using Open Vix Apollo 166 file.. I am not plugin the ethernet cable due I am doing just tests and learning to configurate and scan satellites..
    Question: I need to plug the ethernet cable to configurate my LNB's and switchs??
    Reply With Quote
     

  3. Collapse Details
    #33
    Join Date
    Dec 2010
    Location
    Atlanta, Ga.
    Posts
    8,188
    Post Thanks / Like
    I have no good idea of what you have done For some reason, part of your antenna system is not working. Either post some screenshots of your antenna settings in the receiver for each satellite, or copy the settings for each satellite and post them here.

    You need to set up different lnb numbers for each lnb that you have, You cannot use LNB1 for ll of your lnbs and expect it to work.

    All of your antenna settings are stored in a file named settings. This file is located in etc/engima2 of your receiver. You may use the plugin DreamBox Explorer, or you can connect to your local network and use FileZilla to transfer this settings file.

    Again, If you cannot post the settings file, then copy the antenna settings that you have for each satellite and post them. Do Not Post Errors! Make sure what you post is what is in the receiver.
    Reply With Quote
     

  4. Collapse Details
    #34
    Join Date
    Apr 2015
    Posts
    39
    Post Thanks / Like
    Ok...I will take some pictures to post here
    Reply With Quote
     

  5. Collapse Details
    #35
    Join Date
    Dec 2010
    Location
    Atlanta, Ga.
    Posts
    8,188
    Post Thanks / Like
    There is a plugin that allows you to take screenshots. This is much better than using a camera. You can also connect the receiver to a network, then access the receiver on a computer by typing the ip of the box into a browser. Doing this will give you the web interface.
    Reply With Quote
     

  6. Collapse Details
    #36
    Join Date
    Apr 2015
    Posts
    39
    Post Thanks / Like
    Yesterday I did some test.
    Seems that I am viewing more "clear" the configuration details on enigma2..
    Seems that I found How set my switch 4x4..Seems that the Option is "Tone Mode"..
    Looks like Mode "On" = 22khz and "OFF"= 0
    This because I have set One LNB Universal to get the Low frecuencies(9600) normally we set "Off".. I did blind scan and I got all Tp's on 50.0W ku..I guess that to use high frecuencies(10600) I need to set Mode "On".. I need to do a test on 97W ku to see results.
    I dont know the other Option : "Band".. What means?
    Reply With Quote
     

  7. Collapse Details
    #37
    Join Date
    Dec 2010
    Location
    Atlanta, Ga.
    Posts
    8,188
    Post Thanks / Like
    Band means the 22KHz will operate per the Ku band setting, which says for
    Universal LNB:
    22 KHz off = 9750
    22 KHz on = 10600
    22 KHz tone switches to ON at 11700 MHz. this is your Band Setting.
    So do not use band unless you have an universal LNB.
    Reply With Quote
     

Page 4 of 4 FirstFirst 1234

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •