March Firmware

[Marv]

The March firmware for the mini second edition has been posted on th X square site. I've been told it addresses the issue with the time settings. I haven't tried it yet.

[cpr43]

There is a great commitment from X2 for the Mini. Their partner dropped the Ismart m100 out of the market and this one will be the replacement. A couple of things are being working out in the firmware so expect to see some releases soon.

[Marv]

I loaded the March firmware today. the clock problenm is not fixed. When set to auto it is 5 min. fast. Although it better than it was. It was off 30 mi. It still loses it's memory when shut off. It will re-adjust after boot with the internet connected but takes about 30 sec. or so. This makes time recording impossible without a clock to tell it when to turn on. The firmware install locked up at 99%. I let it set a while thinking it might re-boot but never did. I had no choice but to pull the plug. However it did power back up so I was lucky there.

[cpr43]

Feedback sent to X2. Thanks for the update.