Results 1 to 1 of 1
  1. Collapse Details
    How to update Vu+ Zero CFE (Bootloader Update)
    #1
    Join Date
    Dec 2010
    Location
    Atlanta, Ga.
    Posts
    8,188
    Post Thanks / Like
    Contribute If you enjoy reading the
    content here, click the below
    image to support our site.
    Click Here To Contribute To Our Site
    If you have any problem with Ethernet on Zero, please update CFE.
    If your set is working properly, PLEASE DO NOT UPDATE IT.

    This Bootloader(CFE) should be used for Zero only. Otherwise it will crash the box.

    ** Brief explanation of Zero's bootloader update **

    1. Unzip the vuplus_zero_cfev1.04.zip to USB stick.(There should be /vuplus/zero/cfe_cfe_auto.bin)
    2. Insert USB stick into the USB port of Zero and turn the power on.
    3. It takes just a few seconds to update.
    4. If front LED of Zero displays blinking, remove the USB stick and restart the box.
    5. If the update of the Zero CFE has completed successfully, the LED will blink four times on reboot.

    [Only registered and activated users can see links. ]

    Note:
    The bootloader is very sensitive and is extremely important to the operation of the receiver. You can corrupt the E2 image and recover the box by loading another image. But if you corrupt the bootloader, you may have to send the receiver somewhere to get it repaired. Pay attention and be careful.

    Do Not install this update unless you know why you are doing it! EB
    Attached Files Attached Files
     

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •