Short video attached showing 30 channel scan and channel changes between different frequencies.
Results 231 to 240 of 331
-
03-22-2015,12:04 PM.
.
.
Meine Dreambox One ist ein Stück Scheiße!.
-
03-22-2015,03:02 PM
Hello EB
Thanks for the video, I bypass the splitter and I was able to scan 49 channels, my scan is not as fast as yours, and some of the HD channels the picture kind of freezes up and than you can watch any thing, I had to restart and everything was fine until you hit another HD that is freezing up, not all HD freeze up, channels look pretty good.
Regarding my Splitter, do you know any that will connect 2 TV to one antenna for UHF/VHF, if you guys have any suggestions, please let me know.
Thanks for the help.
Regards.
Chewie
-
03-22-2015,03:08 PM
Progress!!!!
Home Depot sells splitters. You need one designed for tv.
Also, make note of any frequency that has more than 5 channels on it. Delete the frequency from your scan, and then delete the channels. Any frequency that has more than 5 channels may corrupt the device. This is a work-around until Sundtek fixes it.
-
03-22-2015,04:19 PM
The cox cable guy gave me a splitter a few years ago when he installed my internet. Industrial sealed grade and low loss and perfect for uhf/vhf compared to the Chinese stuff out there that claim 3.0 db loss per output.
-
03-22-2015,06:06 PM
here are some of the pictures:
-
03-22-2015,06:12 PM
Very nice, Chewie.
-
03-22-2015,07:32 PM
Frequency 617MHz or 617000 needs to be deleted and all the channels for that frequency needs to be removed. Leaving the 617MHz channels in there will cause corruption and driver problems. Any other frequency that has over 5 channels should be removed.
.
.
.
Meine Dreambox One ist ein Stück Scheiße!.
-
03-23-2015,08:38 AM
Had messy, rainy weather all weekend so it was a good time to test for hang-ups or black screens that would need a hard boot to correct. Attached are some pictures of a channel that does not come in well at all in bad weather because of its location. This channel used to cause the receiver to lock up or have to be hard booted because of a black screen. i let the receiver sit on this channel for several hours without any issues.
Overall performance has increased considerably since deleting the Big Channels. The glitching problem has improved to the point that it is probably equal to the regular television, and signal sensitivity has increased. The Sundtek Device has been moved to another room where everybody can use it. Still waiting on device#2 due to the slow USPS.
[Only registered and activated users can see links. ][Only registered and activated users can see links. ][Only registered and activated users can see links. ]
-
03-23-2015,03:59 PM
The next version will support bigger transponders for example:
0x0000 0x0003: pmt_pid 0x0030 Sundtek -- ION (14.1) (running)
0x0000 0x0004: pmt_pid 0x0040 Sundtek -- qubo (14.2) (running)
0x0000 0x0005: pmt_pid 0x0050 Sundtek -- IONLife (14.3) (running)
0x0000 0x0006: pmt_pid 0x0060 Sundtek -- Shop (14.4) (running)
0x0000 0x0007: pmt_pid 0x0070 Sundtek -- QVC (14.5) (running)
0x0000 0x0009: pmt_pid 0x0090 Sundtek -- TLMD (47.1) (running)
0x0000 0x005a: pmt_pid 0x0290 Sundtek -- Starz (14.90) (running)
0x0000 0x005f: pmt_pid 0x02a9 Sundtek -- Shotime (14.95) (running)
0x0000 0x0060: pmt_pid 0x02ae Sundtek -- Airbox (14.96) (running)
previously a transponder like that one just dropped the channel names completely.
-
03-23-2015,04:07 PM
Looking forward to the next version.