Thread: Vu+Zero Help

Page 1 of 7 123456 ... LastLast
Results 1 to 10 of 63
  1. Collapse Details
    Vu+Zero Help
    #1
    Join Date
    Dec 2012
    Posts
    9,278
    Post Thanks / Like
    Contribute If you enjoy reading the
    content here, click the below
    image to support our site.
    Click Here To Contribute To Our Site
    All right enigma 2 gents I need to know which file to flash my new vu+zero. I'm going to do the main setup and have a look.
    Reply With Quote
     

  2. Collapse Details
    #2
    Join Date
    Dec 2010
    Location
    Atlanta, Ga.
    Posts
    8,190
    Post Thanks / Like
    Try the Open PLi Image. Any of the images that are designed for the Zero will work.
    You should also install FileZilla on your computer so you can transfer files to the Zero through your local network.
    .
    .
    .
    Meine Dreambox One ist ein Stück Scheiße!.
    Reply With Quote
     

  3. Collapse Details
    #3
    Join Date
    Feb 2012
    Posts
    7,247
    Post Thanks / Like
    Costa, the only differences you will find in the images are the flexibility offered in plugins (some may show up in the plugins section available for download and some that will work only with certain images), skins, gui layout, etc. Your choice, best to try them one at a time until you find the one you like.

    You might check for a multiboot option (don't know if it's available for the Zero. Usually embedded into the image or available as a plugin. This will allow you to keep x number of images on your hard drive or usb stick that you can select from a menu to boot up and not have to flash every time you decide to change an image. Very nice option for testing purposes.
    Reply With Quote
     

  4. Collapse Details
    #4
    Join Date
    Dec 2012
    Posts
    9,278
    Post Thanks / Like
    I can't get the zero to communicate with my tv in the living room, it works fine in the basement. I have set it to 720p which works great in the basement and 1080i which is a bit shifty. I've attempted with the other and get no sync signal.
    Reply With Quote
     

  5. Collapse Details
    #5
    Join Date
    Feb 2012
    Posts
    7,247
    Post Thanks / Like
    Did you set it for 60 hz?
    Reply With Quote
     

  6. Collapse Details
    #6
    Join Date
    Dec 2012
    Posts
    9,278
    Post Thanks / Like
    No, just 720p and 1080i. I'll take it downstairs again and have a look.
    Reply With Quote
     

  7. Collapse Details
    #7
    Join Date
    Dec 2012
    Posts
    9,278
    Post Thanks / Like
    Finally. 60hz did the job, strange that it worked fine on my other tv.
    Reply With Quote
     

  8. Collapse Details
    #8
    Join Date
    Dec 2012
    Posts
    9,278
    Post Thanks / Like
    Any way to load a NA satellite list? This receiver is a bit complicated, looking forward to the challenge. I have downloaded filezilla and I'm going to attempt to flash Black Hole file but not quite sure how that will go. I have it on 1080i English NHK channel on 58w, picture quality is spot on.
    Reply With Quote
     

  9. Collapse Details
    #9
    Join Date
    Dec 2010
    Location
    Atlanta, Ga.
    Posts
    8,190
    Post Thanks / Like
    You may use my satellite file. First, See if you can connect to the receiver using FileZilla You will need to access the network in your receiver to see what ip has been assigned to your local network, then enter the receiver's ip into FileZilla and try to connect. The login or username and the password for the box should be root root.
    .
    .
    .
    Meine Dreambox One ist ein Stück Scheiße!.
    Reply With Quote
     

  10. Collapse Details
    #10
    Join Date
    Dec 2012
    Posts
    9,278
    Post Thanks / Like
    I got Black Hole on my vu+zero and it's real cool. I am going to attempt to connect with filezilla.
    Reply With Quote
     

Page 1 of 7 123456 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •