Just looking for others opinions. We've had several nasty wind storms lately and my motorised 4' ku dish seems to be a bit out of whack. I am using usals with my stab 1.2 hh motor. When I scan in a sat like G3c at 95w I get optimum signal quality but as I move the dish east I have to compensate in my motorised setting by reducing my westerly degrees. As I get to Hispasat at 30w my degree difference from 95w is 3 degrees less and signal quality is optimised at 30w. Unfortunately it's Winter and getting to the dish is quite a challenge. I'm at a loss and scratching my head. Either the dish isn't tracking the arc as well as it should, the dish is warped or something is loose. Any ideas?