Egami 6.6 does not fix my HDMI problem, but it does look like a interesting image. I like the info bar at the bottom that contains signal, quality, freq, polarity, SR. Very nice. I have also spent some time on their very good message board. Looks like the guys are getting some support from this team.
Thread: Atemio Memesis no HDMI output
Results 21 to 29 of 29
-
01-02-2015,02:42 PMC: 8' Andrew w/orthomode feeding twin Norsat 8515, Atemio Nemesis
Ku: 1.2m Channel Master w/orthomode feeding twin NJR universal lnbs, Manhattan
DBS: Motorized DTV Slimline w/DMS 922 circular, Jynxbox Ultra V3
4:2:2 AZminiMe slaved off C/Ku
-
01-02-2015,03:26 PM
Well here is my latest brainstorm on this switch. The Nemesis has a HDMI input as well as a output. I could try feeding all my secondary FTA receivers thru the switch and then in and back out of the Nemesis. Trouble is I can't find where on the remote or the E2 menus where to access the HDMI input. Anybody else have this feature on your box?
C: 8' Andrew w/orthomode feeding twin Norsat 8515, Atemio Nemesis
Ku: 1.2m Channel Master w/orthomode feeding twin NJR universal lnbs, Manhattan
DBS: Motorized DTV Slimline w/DMS 922 circular, Jynxbox Ultra V3
4:2:2 AZminiMe slaved off C/Ku
-
01-02-2015,06:34 PM
That would be an interesting experiment, since the input is probably for a dvd device. I wonder if any of your images have incorporated this input feature yet, seeing how the Nemesis is new. Since your rc doesn't have a button for it, the feature may be part of the recorded movies playback feature of the receiver. Maybe there, it may have the option to select from you hard drives, usb drives or usb input.
-
01-02-2015,07:57 PM
East,
I looked in that area of the menus, didn't see "hdmi input". The others are in there. Anyone else have a box with a HDMI input?C: 8' Andrew w/orthomode feeding twin Norsat 8515, Atemio Nemesis
Ku: 1.2m Channel Master w/orthomode feeding twin NJR universal lnbs, Manhattan
DBS: Motorized DTV Slimline w/DMS 922 circular, Jynxbox Ultra V3
4:2:2 AZminiMe slaved off C/Ku
-
01-02-2015,09:20 PM
Don't know if this will help..........
ATEMIO NEMESIS E2&TitanNit Firmware M31064 v1.56
HDMI input is active (PiP button) <---------------------------------------------
Improved PiP function and menu added (2x PiP button)
-
01-02-2015,09:57 PM
You should see this....
-
01-03-2015,09:09 AM
East when I push the pip button I just get a small square in the upper right corner with the same picture as the main screen. I do not see the menu you posted.
C: 8' Andrew w/orthomode feeding twin Norsat 8515, Atemio Nemesis
Ku: 1.2m Channel Master w/orthomode feeding twin NJR universal lnbs, Manhattan
DBS: Motorized DTV Slimline w/DMS 922 circular, Jynxbox Ultra V3
4:2:2 AZminiMe slaved off C/Ku
-
01-03-2015,11:04 AM
I think you have to push the yellow or blue button to access that menu, depending on the image.
-
01-03-2015,04:16 PM
Thanks, the yellow button does the job. Too bad though, the HDMI switch is not recognized properly by the Nemesis HDMI input, all I get is sound, no pic.
C: 8' Andrew w/orthomode feeding twin Norsat 8515, Atemio Nemesis
Ku: 1.2m Channel Master w/orthomode feeding twin NJR universal lnbs, Manhattan
DBS: Motorized DTV Slimline w/DMS 922 circular, Jynxbox Ultra V3
4:2:2 AZminiMe slaved off C/Ku