When I do a cold start up I see the Atemio logo on the screen for a bit, then goes black screen as the box boots up. I have normal video out of the AV jacks. Something in the E2 settings?
Thread: Atemio Memesis no HDMI output
Results 1 to 10 of 29
-
Atemio Memesis no HDMI output – 12-23-2014,04:46 PMC: 8' Andrew w/orthomode feeding twin Norsat 8515, Atemio Nemesis
Ku: 1.2m Channel Master w/orthomode feeding twin NJR universal lnbs, Manhattan
DBS: Motorized DTV Slimline w/DMS 922 circular, Jynxbox Ultra V3
4:2:2 AZminiMe slaved off C/Ku
-
12-23-2014,06:49 PM
Post your settings file in etc/enigma2. Sounds like something is not set right, and all info should be in that file.
.
.
.
Meine Dreambox One ist ein Stück Scheiße!.
-
12-24-2014,02:57 PMC: 8' Andrew w/orthomode feeding twin Norsat 8515, Atemio Nemesis
Ku: 1.2m Channel Master w/orthomode feeding twin NJR universal lnbs, Manhattan
DBS: Motorized DTV Slimline w/DMS 922 circular, Jynxbox Ultra V3
4:2:2 AZminiMe slaved off C/Ku
-
12-24-2014,03:02 PM
What is the correct resolution for your television? Is it 720p?
.
.
.
Meine Dreambox One ist ein Stück Scheiße!.
-
12-24-2014,03:11 PM
1080i
C: 8' Andrew w/orthomode feeding twin Norsat 8515, Atemio Nemesis
Ku: 1.2m Channel Master w/orthomode feeding twin NJR universal lnbs, Manhattan
DBS: Motorized DTV Slimline w/DMS 922 circular, Jynxbox Ultra V3
4:2:2 AZminiMe slaved off C/Ku
-
12-26-2014,04:20 PM
Ok, at EB's suggestion I tried several HDMI cables today. They all work with the Nenesis IF I bypass my external HDMI switch. My TV only has two HDMI ports, so this switch (remote controlled) expands this to 5 ports. All my other FTA receivers pass thru this switch with no problem.
Anybody know anything about HDMI protocols? Seems to me there is some sort of handshake when HDMI is connected. Do I need a different switch or is the Nemesis hardware the problem?C: 8' Andrew w/orthomode feeding twin Norsat 8515, Atemio Nemesis
Ku: 1.2m Channel Master w/orthomode feeding twin NJR universal lnbs, Manhattan
DBS: Motorized DTV Slimline w/DMS 922 circular, Jynxbox Ultra V3
4:2:2 AZminiMe slaved off C/Ku
-
12-26-2014,11:39 PM
What is the make/model of the HDMI switch?
.
.
.
Meine Dreambox One ist ein Stück Scheiße!.
-
12-27-2014,12:12 AM
Did you check all five ports to be sure they were all compatible with the Nemesis? I had problems with an auto five port switch not recognizing a receiver until I tried each port and got lucky.
-
12-27-2014,02:13 PM
I just tried all 5 ports on the switch. No go for the Nenesis.
The switch was bought from Amazon and is a Kinivo 501 BN, and supports up to HDMI 1.3C: 8' Andrew w/orthomode feeding twin Norsat 8515, Atemio Nemesis
Ku: 1.2m Channel Master w/orthomode feeding twin NJR universal lnbs, Manhattan
DBS: Motorized DTV Slimline w/DMS 922 circular, Jynxbox Ultra V3
4:2:2 AZminiMe slaved off C/Ku
-
12-27-2014,06:04 PM
I have a 3x1 HDMI switch with a Manhattan 1933 on one port and a WD media player on another port. If the Manhattan has power, even in standby, it won't let the media player take control of the switch automatically. So, I plugged it into the cable box and have it set to cut power to the outlet when the cable box is in standby, so the media player can then take over the switch.
And then there is that old Sadoun 22kHz switch that if you connect it to a port on a DiSEqC switch and then switch to that port, won't relinquish the port to let it switch to another port...
Funny, these switches, eh?