Nemesis start up challange

[manicscrewdriver]

What Nano was talking about was the Nemesis image, a rival OS to Enigma 1 for the early dreambox receivers, sadly while superior to enigma in many ways it never really took off for the other Enigma 2 based receivers.

Its still Enigma 2, written by EDG an Italian image team. Even now i think its probably the most stable image on my DM800Se and believe me i've had a lot of images on it I must admit the Nemesis receiver spec on paper is impressive, It should be interesting to read your thoughts and opinions on it the more you use it. It would be something i would look at myself.

Unfortunately I'm holding off buying new receivers at the moment, I have enough stuff to squeeze into the 20ft Container as it is before i move everything across the pond, Just waiting for the Visa to come through now

Nano

[el bandido]

Still couldn't get in with root.


[Only registered and activated users can see links. ]

Host should not be root. Type the network ip of the receiver for Host.

For example:
Host = 192.138.0.9
Username = root
Password = root

[Pixl]

EB,

Ok, we're getting there. That got me in. I can see the "etc" folder, but now can't get it to transfer to the PC.


[Only registered and activated users can see links. ]

[el bandido]

Highlight etc and drag it across to a known location such as desktop.
Click on the folder and drag it to transfer the file.

[Only registered and activated users can see links. ]

[Pixl]

[Only registered and activated users can see links. ]

Ok, attached here.

[el bandido]

Very Good! We can deal with this.
What image are you using? Is this the OpenATV image I suggested or is it the image that came with the receiver?

[Pixl]

OpenATV image dated 10-30 that you suggested. I've had a little look around in it and set one TP. It is easier to use than the original image, I think this could be the ticket I was looking for.

[el bandido]

OK.
So that etc folder belongs to OpenATV...Excellent!

Do a factory default to clear all of the sky and other stuff that we cannot use. It will be almost like you flashed the image because the setup will start with AV settings and such. Do the factory default and I will get you some files together to transfer. You need American satellite file and some other stuff. Easy to install with FileZilla.

[el bandido]

The satellite file is located at: /etc/tuxbox
You can copy /etc/tuxbox then paste it in the remote site address for FileZilla, then press enter and you should go right to the file location in the receiver.

Delete the satellites.xml that is in /etc/tuxbox. You may do this by highlighting the file and Right Click the mouse, then follow the prompts.
Next, unzip the attached satellites.xml file and use it to replace the original satellites.xml file that you deleted in /etc/tuxbox.

Reboot the box when finished and you should have a satellite file that has a bunch of good transponders in the American satellites.

[Pixl]

Thanks EB,

Wife has taken over the tv for the evening. I'll try first in the morning.