Nemesis start up challange

[Pixl]

I've managed to get the Nemesis language from German to English, and the video set to 1080i, 60 hz. I now have a picture on the AV output, but just black from the HDMI output except a brief logo during boot. My trouble is trying to navigate the E2 menus and read the small print on the screen. This box seems similar to the Dream Box line up, maybe there is something I can load to get around this receive easier?
So far with much struggle I've managed to load the MeTv tp into one of the existing Euro sats and have it working.

[el bandido]

[Only registered and activated users can see links. ]
Download and install the OpenATV image dated 10-30 the link.
Then use FileZilla or something similar to copy the etc folder that is in the receiver. Zip the etc folder and post it here. I will see if I can make the needed changes if you will do that.

[el bandido]

You can type the network ip of the Nemesis into your web browser of a computer that is connected to the same network and get a web interface for the Nemesis. Doing this will allow you to take screenshots of problem areas in the Nemesis menus.

[manicscrewdriver]

Pixl, which receiver are you using. I have been using EDG Nemesis on my Dreambox DM800Se for quite a few years so i maybe able to help as i know my way around the image quite well.

Are we talking about the same image?

Nano

[Pale-Rider]

Pixl, which receiver are you using. I have been using EDG Nemesis on my Dreambox DM800Se for quite a few years so i maybe able to help as i know my way around the image quite well.

Are we talking about the same image?

Nano

No he's not talking about the Nemesis image Nano, but the Atemio Nemesis receiver.

[Only registered and activated users can see links. ]

[Pixl]

Pixl, which receiver are you using. I have been using EDG Nemesis on my Dreambox DM800Se for quite a few years so i maybe able to help as i know my way around the image quite well. Are we talking about the same image?

Nano,

This is the Atemio Nemesis just released in Germany, August 2014. So probably different than the Nemesis you have had for a few years.

[Pixl]

[QUOTE=el bandido;76699][Only registered and activated users can see links. ]
Download and install the OpenATV image dated 10-30 the link.
Then use FileZilla or something similar to copy the etc folder that is in the receiver. Zip the etc folder and post it here. I will see if I can make the needed changes if you will do that.[/QU
EB,

I tried to log into the box using File Zilla and STBHD_LAN_MM. Neither would connect due to log in problems. What might the user name and password be?
I did get in with a browser pointed to the IP of the box. Here are screen shots of what I see.

[Only registered and activated users can see links. ]

[Only registered and activated users can see links. ]

[Pale-Rider]

Nano,

This is the Atemio Nemesis just released in Germany, August 2014. So probably different than the Nemesis you have had for a few years.

What Nano was talking about was the Nemesis image, a rival OS to Enigma 1 for the early dreambox receivers, sadly while superior to enigma in many ways it never really took off for the other Enigma 2 based receivers.

[el bandido]

UserName = root (lower case letters)
Password = root (lower case letters)

You can take a screenshot using the web interface under System Functions on the left side of the screen.

[Pixl]

Still couldn't get in with root.


[Only registered and activated users can see links. ]