FW Upgrade by Internet?

[Costactc]

I thought the backup worked well but I only realised now that if you perform a backup it will also flash the same file that you had working with the receiver. Although most of the internet functions are working spot on, I will need to flash the new sw and start all over again.

[ViP3R]

I thought the backup worked well but I only realised now that if you perform a backup it will also flash the same file that you had working with the receiver. Although most of the internet functions are working spot on, I will need to flash the new sw and start all over again.

Morning Costa,

To restore the channel list only and not the old software read below..you won't have to start over.

1-Attach USB Flash to receiver

2-Make Software Backup as Following

Menu - External Device - Upgrade By USB - Backup - Start

3-To Restore the Channel list please make the following

Menu - External Device - Upgrade By USB - Backup ( Press Left on Upgrade Mode and change into ( Userdb )

Then press Start and wait till the receiver make restart automatic .

After Restart all the channel list will restore on the receiver.

Also there is a new Sept 26 file available through FTP. I will upload it also.

[Costactc]

Upgraded to the September 26 file and loaded all my info and it retained the latest file, worked like a charm. However, the last thing you need to do when reloading your backup is:

upgrade mode userdb

upgrade file backup.abs

start

You cannot go left or right in the upgrade file area.