I've been waiting a while for the dual feed was available. I just ordered one to test and see if it can compete with my other feeds, just want to make sure that I have the most reliable lnbf before winter comes:


The C2PLL™ Phase Lock Loop C-band series of two output LNBF technology provides exceptional reception of weak satellite signals and the most demanding high FEC S2 channels. The wideband version, the C2WPLL™ covers the entire 3.4 to 4.2GHz C-band range. Designed to meet the requirements for light commercial applications and the most demanding satellite hobbyist, it is cost-effective, high quality and professional grade. The C2W-PLL™ polarity is voltage switched independently on both outputs for receiving horizontal / vertical linear or right / left circular (with the included dielectric slab). It includes a flat scaler designed for prime focus dish types and fits the industry standard 68mm scalar mounts and the optional Titanium conical scalar for offset type dishes.

Regular LNBFs typically provide reliable performance for five to seven years. DRO type LNBFs lose performance over time as the mechanically tuned frequency slowly drifts until one day, the receiver is no longer capable of tuning the satellite channels. PLL LNBFs do not rely on a mechanical tuning slug that may shift off frequency due to physical damage or aging. PLL LNBFs have a crystal oscillator that will remain tuned exactly on frequency. The C2W-PLL frequency is +/-50KHz and typically the operational drift to be within +/- 10KHz.

The heavy aluminum casting, snow white poly coating and cooling fins assist with keeping the C2WPLL operational temperature low and running cool. These thermal control features increase the C2W-PLL performance and stability, insuring many years of reliable service.

Titanium Satellite provides a Lifetime Warranty on the C2W-PLL against frequency drift! If you are not completely satisfied with the performance of the Titanium C2PLL™ series of LNBFs, we will promptly refund your purchase!



C2W-PLL Specifications

Number of Outputs 2
RF Input 3.4 - 4.2GHz
IF Output 950 - 1450MHz
L.O. Frequency 5150MHz
Noise Figure 15°K (typical)
Gain 65dB (typical)
Stability 50KHz (typical)
Cross Pol Iso 20dB (typical)
Image Rejection 45dB (typical)
Phase Noise -85dBc@10KHz (min)
Polarity Switch V: 11.5 - 14vdc
H: 16 - 20vdc
Input VSWR 2.1:1 (max)
Output VSWR 2.0:1 (max)
Operation Temp -22 to 140°F
Storage Temp -40 to 160°F



[Only registered and activated users can see links. ]