X² PREMIUM III - X2_USA_V1.27B4_0905 - Discussion

[ViP3R]

Discuss this Topic here.

[kaboota]

does this x2premium 111 new releace works with iks

[Costactc]

does this x2premium 111 new releace works with iks

This is a true fta site, we do not discuss iks or any other form of hack here.

[Costactc]

Blind scan issue that I have encountered. If you highlight more then one satellite and attempt to blind scan another then anything scanned in are kept in memory of the other satellite. For example, I blind scanned Express AM44 at 11w and then attempted to blind scan 20 and 22w, each time a channel scanned it appeared as being 11w although that wasn't the sat I was scanning. I am now scanning them individually with only one selected, which can be a pia. I noticed that x2 III has storage for 65 sats in total but the list that comes with the file only starts at 45w, I will create my own list.

[ViP3R]

Blind scan issue that I have encountered. If you highlight more then one satellite and attempt to blind scan another then anything scanned in are kept in memory of the other satellite. For example, I blind scanned Express AM44 at 11w and then attempted to blind scan 20 and 22w, each time a channel scanned it appeared as being 11w although that wasn't the sat I was scanning. I am now scanning them individually with only one selected, which can be a pia. I noticed that x2 III has storage for 65 sats in total but the list that comes with the file only starts at 45w, I will create my own list.

Costa, are you on the latest file? Sept 5 is the current. you can download from your box. I can scan my whole arc at once with all checked with no problems.
Also sept 5 file allows for scanning just one sat with no need to un check others.

[Costactc]

First thing I did was flash the latest file. I have tried repeatedly with the same problem. I also had an issue while scanning Intelsat 25 at 31.5w on c band, ORTM scanned in on the x2 III as a radio channel and 2 attempts at rescanning only for tv channel did not result in opening that channel. I scanned in ORTM as a tv channel on my technomate 5402 without any issues.

[tanka2]

same problem about the scan and I eliminate the 45 and 46 and create the t12 at 15 west and hispansat at 30 west.Not complain the box are new and the picture very good.I scan Hispansat and t12 no problems

[ViP3R]

I'm only doing KU at the moment, so I can't try that..I'll let you roll on and see if anything else pops up then we can report it.

[Costactc]

I highlighted all sats and was attempting to blind scan Ses 6 at 40.5w. As the first tp was about to scan in it was assigned to my first satellite on my list which is Express AM44.

[ViP3R]

I highlighted all sats and was attempting to blind scan Ses 6 at 40.5w. As the first tp was about to scan in it was assigned to my first satellite on my list which is Express AM44.

When I scan all it will start at the highest bird, 125W in my case and work it's way down.