That is a fine setup Costa. Just what I am looking for. I would be willing to drive far for a dish like that. I talked to a guy from Plattsburgh the other day and he says there is a Ferry that takes you from Vermont to the NY side.
Thread: Channel Master 1.2m
Results 21 to 30 of 39
-
04-13-2015,05:26 PMPortable Comtech 13', Winegard 10', SAMI 7.5', 3 39" Ku dishes one motorized. Scanning 30w-131w
-
04-13-2015,06:20 PM
In ground if you have an area in the back yard where it won't be very visible to the wife. That's how I was able to keep my wife happy. LOL... Last resort the roof. Or an npr that you can move around for best location.
-
04-14-2015,02:10 PM
Thanks East but my back yard isn't that big, the wifey would eventually see it...I'll figure something out but concentrating on slapping an actuator onto my 1.2m Fortec at the moment with Lexmark's home made polar mount.
-
04-14-2015,02:20 PM
Some pictures of the heavy duty motor, the first being the channel master dish mount:
[Only registered and activated users can see links. ][Only registered and activated users can see links. ][Only registered and activated users can see links. ][Only registered and activated users can see links. ][Only registered and activated users can see links. ]
-
-
04-16-2015,02:44 PM
The weather was spot on today so we installed the newly painted Fortec 1.2m dish and its new polar mount and actuator. I haven't tested it out yet but will tomorrow as long as it doesn't rain as the positioner wires are outside for now:
[Only registered and activated users can see links. ][Only registered and activated users can see links. ][Only registered and activated users can see links. ][Only registered and activated users can see links. ][Only registered and activated users can see links. ][Only registered and activated users can see links. ][Only registered and activated users can see links. ]
These are the pictures of Lexmark's home made polar mount, just awesome.
-
04-25-2015,10:21 AM
I got the actuator wire hooked up outside and somehow squeezed it into my basement, with my sons' help. The hole needed to accommodate 2x5 ribbon cable and now 3 singles so it was real tight. I now need to get it to my living room, the hard part that I will attempt this afternoon to hook it up with the vbox 7 positioner. Hopefully, some time this weekend, I will be able to blind scan Amc 21 at 125w with my vu+solo2 and see if I can help Rodder out.
-
04-26-2015,06:55 AM
Took the better part of 3 hours yesterday, swollen arms and cuts on both hands to finally realise that the hole leading to the living room is to small to accomodate all the wires. My carpentry skills, or lack of, will come into place as drywall will be removed and drilling to be done to increase the size of the hole. I will get that done with the minimal amount of curse words as possible, I hope.
-
-
04-26-2015,10:50 AM
All ku sats scanned in from 15-103w and will continue later on and scan 125w with my vu+solo2 to see the results of a blind scan.