OpenViX-Apollo 001 AVAILABLE NOW
OpenViX Apollo-Enigma2 GIT CHANGELOG
Code:openvix: build 906 [epgcache] add Virgin UK support. [GetEcmInfo] if no /temp/ecm.info, do not assume channel is 'FreeToAir'. Merge remote-tracking branch 'pli/master' [SoftwareUpdate] fix reading of e2 log. Only clear CAID cache when it is filled with the fake CAID 0000 GetEcmInfo: Avoid that ecm has the value None Improve french translation [SoftwareUpdate] fix log view. [EpgSelection] fix possible BSOD. ServiceInfo: small changes to the length of the text [MovieList] add fallback question to delete instead of move to Trash, if move failed. [Trashcan] fix issues with creating. streamserver: fix potential segfault on authentication Ensure that the ecm info in softcamSetup is the latest [NetworkSetup] fix nfs autostart for new OE. streamserver: use internal setting for authentication [Translatons] ET Update, thanks Rimas! streamserver: initialize cryptdata [TimerList] move Orb position after Service Name. [TimerList] cleanup support code for RemoteTimer plugin. [Satfinder] Allow access to plugin while recordings in progress Merge remote-tracking branch 'pli/master' [InfoBarGenerics] add Vol keys not to close SIB. Small improvement related to encryption flag [InfoBarGenerics] only allow PiP zapping for STB's that support it. [TimerList] cosmetic tweak. ims cs po fixed missing text for sortby, movieoff and movieoff_menu when is selector on directories streamserver: follow up on 4fbfb08acd95f91f107c21a38521c7de96856aae generalise radio sd mvi [TimerList] add RemoteTimer support. Merge remote-tracking branch 'pli/master' [config] add removeNotifier. remove whitespace add stream info similar as orbital position into timer event in timerlist. Thanks to Dima73OE-ALLIANCE GIT CHANGELOG
Code:openvix: build 001 [mutant2400] add initrd for transcoding [busybox] need rebuild for gigablue update [dm800] fix wifi build for legacy kernels [gigablue] update gb-multiquickbutton for new oe-core Update xtrendalliance.conf [openhdf] update bootlogo.bb [GigaBlue Quad, QuadPlus] ddbootup - set eth0 and usb to second cpu thread add network tweaks [openhdf] pushed some updates that have been made in the last few month... [dags] 7356 update drivers 23.05.2014 [openhdf] change spinner files [GigaBlue Quad, QuadPlus] Update driver [GigaBlue Quad, QuadPlus] Change defconfig [3rd-party plugins] Update [GigaBlue SEPlus, UEPlus] ReADD enigma2-plugin-systemplugins-audioeffect [GigaBlue SEPlus, UEPlus] Remove TARGET_FPU [GigaBlue SEPlus, UEPlus] Switch to Kernel 3.12.1 [hd2400] update drivers 23.5.2014 Merge branch '2.2' of https://github.com/oe-alliance/oe-alliance-core into 2.2 [INI] added new r8723 wifi driver + fixed 8192cu for 3.13.0 kernels [submodule] e2ooenplugins update [packagegroup-base] make change so it forces a rebuild, as GigaBlue has changed it's 'MACHINE_EXTRA_RDEPENDS' [hd2400] update drivers 21052014 [INI] some driver update [HDx] Chane rcu map for Beyonwiz only [ini] prepare for future use + wifi patches for > 3.13.0 [openwebif] Sanitise version number [gigablue] add start of transstreamproxy to inetd conf [openatv] add splash1.bmp [meta-oe] fix checksum on linux-libc-headers. [3rd-party plugins] Update [azboxme] add missing kernel patch [gigablue] clean up conf [3rd-party plugins] Update [dags] update drivers 19.5.2014 Model 7335 and 15.05.2014 model 7356 [odin] update drivers file name to zip [odin] update drivers 16.5.2014 optimise for new oe-a 2.1 (gcc 4.8.2) [gigablue] enable transcoding need new drivers [dreambox] fix build new oe-brand [meta-oe] fix some BASE variables. [core] fix BASE variable's. [blackbox] update drivers 17.5.2014, test for oscam and streaming Update enigma2-plugin-skins-blue-hd.bb Update oe-alliance-skins.bb [oe-alliance-skins] add Red-HD Add python-compression to enigma2-plugin-extensions-openwebif.bb [vuplus] hbbtv/youtubetv - Fixed hangup bug and segmentation fault. [3rd-party plugins] Update [hd2400] update drivers 19.5.2014, update ci for 4 tuners [3rd-party plugins] Update [meta-brands] fix vendor meta base folder variable [3rd-party plugins] Update [3rd-party plugins] Update [meta-brands] fix vendor meta base folder variable, fix drivers meta data. [azbox] move machines folder under conf [meta-brands] gigablue linux fix folder name. [kernel] fix missing patch files [meta-brands] gigablue linux add missing patch. [meta-brands] gigablue drivers fix missing files. [nfs-utils] bump to 1.3.0 [meta-brands] fix layer conf's [meta-oe] remove machine conf's [meta-oe] OpenWebIF bump PV to 2.9 [meta-brands] add machine conf's [meta-brands] rename 'meta-etx00' to 'meta-xtrend' [meta-brands] rename meta-dreambox to 'meta-dream' [meta-brands] move some patches form meta-oe. [gigablue] add kernel 3.12.1 for SEplus/UEplus - no switch to 3.12.1 yet [meta-brands] add some missing linux patches. [engima2] fix build for new layer. [orc] get rid of error messages [busybox] use SHA-512 ($6$...) passsword encryption by default, like the passwd program from the "shadow" package already does. [openvix] add version number to mgcamd [nfs-utils] build for machine as mipsel32 single feed can only store one version, and some kernel's use higher version. [openvix] fix aurora bootlogo [3rdparty] update [layer] add new layer 'BRANDS' used for brands bb's, idea taken from PLi (thanks guys) Merge branch '2.1' of https://github.com/oe-alliance/oe-alliance-core into 2.1 [beyonwiz] fix feeds link for new distro conf [3rd-party plugins] Update [beyonwiz] updated distro conf [dm800] fix file://tc_ematch-header-files.patch'. Unable to fetch URL from any source. Merge branch '2.1' of https://github.com/oe-alliance/oe-alliance-core into 2.1 fix for build with new makefile [openvix] add some bootlogo's to feeds thanks Maxwell. [hd2400] fix typo [hd2400] fix wrong kernel [hd2400] add remote control [formuler] rename linux kernel folder add support new oem skylake model HD2400 [azbox] azbox-hd-buildimage update for new oe-core [dreambox] commit d98bfe2940385dc4885f1c034bd33aaf5c0f767a breaks download Update xtrendalliance.conf [core] fix some packages for single build. [dm800] kernel config remove CONFIG_AUTOFS_FS to fix problem issue with CONFIG_AUTOFS4_FS [cube] kernel config remove CONFIG_AUTOFS_FS to fix problem issue with CONFIG_AUTOFS4_FS [formuler] wlan drivers rt2800 use kernel [3rd-party plugins] Update fix typo last commit add support for formuler F1 [plugins] fix builds for latest oe-core. [3rd-party-plugins] fix build. [nou] fix build warning. [blue-hd] fix build warning. [blue-hd] fix build warning. [nou skins] split into separate bb's. [enigma2-display-skins] fix build for new oe-core. GBQuad/GBQuadplus/800UE Plus/800SE Plus ============= improved demux as follows: - support 128 PID channel for dvb-si. - support 512 PID channels - support ts recodings up to 16 channels by hw, more channels by sw. - support ts streaming up to 16 channels with webif or vlc player. [libcda] fix build for new oe-core. [apr] bump PR. Fix installation [openvix] switch to single build environment. (new makefile required) openvix: build 000 [core] fix builds for latest oe-core. [3rd-party plugins] Update [3rd-party plugins] Deleted ET-Weblinks, as they have not been maintained and no longer work. opendrox branding 2 opendroid branding 2 [3rd-party plugins] Update [iptvlistupdater] revert previous commit, as it brakes install depends. [vuplus] fix install. [core] updates required for latest core merge. [ocram-picons] update conf for new feed location. Update enigma2-plugin-extensions-iptvlistupdater.bb fix depend [vuplus hbbtv] workarounds for issues introduced off late. (thanks PLi) [hbbtv] fix play state error on VOD. Merge pull request #53 from beyonwiz/2.1 [autofs] Specify location of maps. [HDx] Updated driver [libdca] Depend on quilt-native and move the patching to a later point (thanks st7TEAM) [python-pyamf] fix license in bitbake, stop warning. [openvix] bump bootlogo.
Images can be downloaded directly from the OpenViX server ( Link Below )
via a online update
menu> setup> software update.
OR
Via a Telnet session with the following command
init 4 && opkg update && opkg upgrade && init 6
OpenViX-Apollo-Enigam2 GIT CHANGELOG
[Only registered and activated users can see links. ]
OE-ALLIANCE GIT-CHANGELOG
[Only registered and activated users can see links. ]
OpenViX-IMAGES
[Only registered and activated users can see links. ]
OpenViX Tutorials
[Only registered and activated users can see links. ]
Follow us on Twitter [Only registered and activated users can see links. ]
Follow us on Facebook [Only registered and activated users can see links. ]
Results 1 to 10 of 58
-
OpenViX Apollo Updates and Changelogs. – 05-27-2014,12:19 PM
-
06-02-2014,06:18 AM
Apollo feeds have been set to 'unstable' due to possible issues with build 002. For the time being if you wish to use the feeds you will need to set 'allow unstable updates' to yes.
-
06-27-2014,09:02 AMOpenViX-Apollo 012 AVAILABLE NOW
OpenViX Apollo-Enigma2 GIT CHANGELOG
Code:openvix: build 917 [ScanSetup] fix typo. InfoBarGenerics: Only remember lastPiPService for a minute [SystemInfo] tweak 'HasExternalPIP' detection. [PluginBrowser] fix feed state detection. [ServiceName] add auto detection for service reference from Movie files, this will allow picons to be shown in MoviePlayer infobar. [MovieInfo] add service ref to convertor. [lcd] ios300hd does not have LCD. [SystemInfo] add ET6500 to ignore list for external PiP support. [Picon] tweak scale code, hopefully better support for 24bit picons. [PictureInPicture] some fix required for GB. [SoftwareUpdate] fix feed status check. [Translation] ET-update, thanks rimas! [GBQuadPlus] VFD-display tweak. [Translations] NL-update [GBQuadPlus] VFD-display tweak. [GBQuadPlus] VFD-display tweak. [merge] fix errors openvix: build 916 [NTP] fix syncing. Merge remote-tracking branch 'pli/master' Add option that can configure CH+/-, B+/-, P+/- buttons for zapping openvix: build 915 Simplify stop PiP in some plugins Standby: Simplify some code to stop PIP when going in standby ScanSetup: simplify some code to stop the PIP before scan Ensure that PIP proc is made visible even when PIP does not exists Move the eTimer out of the PictureInPicture Screen class optionaly stop previous broadcasted service on return to movielist in movieplayer servicemp3: seek on keyframes. added option for delete movie and return to playlist in movieplayer Rename some keys to make the code a bit better readable openvix: build 914 Use visible proc when available to hide PIP when PIG is displayed Add servicelist cursor behaviour status to helpmenu for zap buttons Update de.po [SystemInfo] fix small typo. Auto hide showpip message after initated or zapped Solve toggle pipzap when pig skin is used Solve a small mistake in the help of the zap buttons fix possible gsod when missing files with defined frequencies, cosmetic - rename value name region to nim, fixed whitespace Use new function option in HelpmenuList for old style zapping Add option in HelpMenuList that also a function can be used. With PIP button toggle normal pip -> pip zap -> pip off Corrigate Help when shitching between old style and enigma2 style zapping update cs.po About.py: Solve a typo retreived -> retrieved Avoid GSOD when exit PIP in PIPZAP when using a PIG skin
OE-ALLIANCE GIT CHANGELOG
Code:openvix: build 012 Update enigma2-plugin-skins-mynovumhd2.bb [blackbox] update flash for oem build [blackbox] update flash size [swf] fix generate nfo [swf] fix typo [octagon] update feed [3rdparty] renome enigma2-plugin-systemplugins-lcnscanner then other disto need this add to privat 3rdparty [xtrend] et8k and et10k update drivers 17.6.2014 [3rd-party feeds] Update. update recipes-distros opendroid [libcheader] fix fix_kernel_build_xargs 3.9.7 build on newer build server [GigaBlue] update initrd.bin - 2nd add missing updated gb800seplus.conf and gb800ueplus.conf [GigaBlue] update initrd.bin Requires new Bootloader to make use of it. Old Bootloader simply ignores those files. [3rd-party feeds] Update. [3rd-party] bump PR, as openvix needed a rebuild and trash tmp folder destroyes deploy folder. openvix: build 011 openvix: build 010 [3rd-party] bump PR recipes distros update [enigma2-tuxtxt] fix patch file. [DVB-USB] it913x depends for newer kernels then 3.12 > [enigma2-tuxtxt] fix patch file. Update enigma2-nou-skins.bb Update enigma2-plugin-skins-red-hd.bb add myNovum2 to feeds [myNOVUM_HD2] add new skin to oe-a feeds openvix: build 009 [gigablue] bump PR of gigablue-dvb-modules.inc due to change in ddbootup [gbquad, gbquadplus] disable all ddbootup tweaks [dags] update drivers 18/19.6.2014 [gigablue] quad add option -F --space-fixup Revert "[gigablue] quad update kernel config stops boot issues" [3rd-party feeds] Update. Bump PR enigma2.bb [gigablue] quad update kernel config stops boot issues
Images can be downloaded directly from the OpenViX server ( Link Below )
via a online update
menu> setup> software update.
OR
Via a Telnet session with the following command
init 4 && opkg update && opkg upgrade && init 6
OpenViX-Apollo-Enigam2 GIT CHANGELOG
[Only registered and activated users can see links. ]
OE-ALLIANCE GIT-CHANGELOG
[Only registered and activated users can see links. ]
OpenViX-IMAGES
[Only registered and activated users can see links. ]
OpenViX Tutorials
[Only registered and activated users can see links. ]
Follow us on Twitter [Only registered and activated users can see links. ]
Follow us on Facebook [Only registered and activated users can see links. ]
-
07-01-2014,01:19 AMOpenViX-Apollo 014 AVAILABLE NOW
OpenViX Apollo-Enigma2 GIT CHANGELOG
Code:openvix: build 919 [SystemInfo] fix 'WakeOnLAN' syntax. [GBQuadPlus] VFD-display tweak. [SystemInfo] add missing import. [PluginBrowser] hide waiting text when list compile is complete. [SystemInfo] 'WakeOnLAN' tweak syntax. openvix: build 918 [SystemInfo] 'WakeOnLAN' gbquadplus does not yet support it, so disable support for now. [SystemInfo] remove machine check in 'HasExternalPIP' as proc does not exist anyway.
OE-ALLIANCE GIT CHANGELOG
Code:openvix: build 014 [Red-HD] update to v1.3 [3rd-party feeds] Update. [myNOVUM_HD2] update to v3.0 [myNovum, Nou and Novum] update to v7.0 [inihde] add micon Updater [hd1100] fix drivers sum [formuler] add support formuler3 update drivers formuler 1 [dreambox}] add missing files for new dvdburn plugin Merge branch '2.2' of github.com:oe-alliance/oe-alliance-core into 2.2 add bdremux openvix: build 013 [openvix] tweak DEPLOY_DIR. [Red-HD] update to v1.2 [dm800se] revert kernel config to last rev [dm500hdv2] revert kernel config to last rev [dm7020hd] revert last kernel config change [dm800hd] fix kernel bootup on first rev off the model [dm800sev2] fix kernel boot issues [dm800sev3] update config forget LZO [dreambox] add module load nfsd, exportfs fuse [dreambox] update kernel configs [GigaBlue] update initrd.bin [openvix] testing new cache location, hopefully fixes some PRServer issues, now all machine share the same 'prserv.sqlite3' database file. (REQUIRES NEW MAKEFILE) [dreambox] update drivers 16.06.2014 7020hd,500hd, 500hdv2, 800se, 800sev2 [dreambox] update blindscan-utils 1.9 Merge branch '2.2' of github.com:oe-alliance/oe-alliance-core into 2.2 [dreambox] update to kernel 3.2.60 [myNOVUM_HD2] update to v2.4 [myNovum, Nou and Novum] update to v6.4 fix dvb-usb Realtek RTL2832 bb for different kernels thanks athoik [hd2400} revert kernel config [skylake] update drivers and config [3rd-party feeds] Update. [en7356] fix typo [xtrend] Update drivers 24.6.2014 et8k/et19k [dags] update drivers 26/27.06.2014 [en7385] rollback patch rtl28xxu [Red-HD] update to v1.1 [Blue-HD] update to v3.1 add driver plugin for dvb-usb Realtek RTL2832 Update enigma2-nou-skins.bb [3rd-party feeds] Update.
Images can be downloaded directly from the OpenViX server ( Link Below )
OpenViX-Apollo-Enigam2 GIT CHANGELOG
[Only registered and activated users can see links. ]
OE-ALLIANCE GIT-CHANGELOG
[Only registered and activated users can see links. ]
OpenViX-IMAGES
[Only registered and activated users can see links. ]
OpenViX Tutorials
[Only registered and activated users can see links. ]
Follow us on Twitter [Only registered and activated users can see links. ]
Follow us on Facebook [Only registered and activated users can see links. ]
-
07-01-2014,01:20 AM
Please note that build 013 and 014 require a reflash and can not be updated online, we understand and appreciate this may inconvenience some of our users but it is necessary to maintain image stability.
You can reflash with either a USB stick or use the inbuilt image manager and you can still use a settings backup from a previous Apollo series OpenViX image
-
07-01-2014,08:02 AM
Hello Pale-Rider
Thanks for this information, regarding the VIX image, we have noticed that the time display is incorrect, and not only the VIX image has this issue, some of the images with karnel 3.3.8 have this problem, if you have any ideas where the problem maybe, please let us know.
Regards.
CHEWIE
-
-
07-01-2014,11:26 AM
I was one of the lucky ones that did not experience the time issue through all the up grades from 001 to 012. Gremlins at work doing their thing. But, thanks for the info.
-
07-01-2014,07:28 PM
Thanks pale-rider, I downloaded the last timezone on the thread, replaced the timezone on /etc/tuxbox on the VIX AND OPENATV images and the time is correct now.
Regards.
Chewie
-
08-22-2014,01:26 AM
IMPORTANT! Build 025 requires a fresh re-flash and setup!
To let all ViX users know, build 025 will require a complete fresh flash and setup with NO RESTORE. This is due to changes in the OE-Alliance core, it has been upgraded from OE-A 2.2 to 2.3. Also there have been many kernel and driver upgrades for a number of supported receivers.