OpenViX Helios Updates and Changelogs.

[Pale-Rider]

OpenViX Helios build 003 is in the process of being built but has been classified as unstable due to a Enigma2 bootloop as the result of a error in the InfoBarGenerics file.

Due to this bootloop we have classified this as a URGENT bug and advise that you not update for the time being, we will notify you further when it is ok to update, very likely later today.

[Pale-Rider]

But if you happened to update: see here. [Only registered and activated users can see links. ]

[Pale-Rider]

OpenViX-Helios 004 AVAILABLE NOW

OpenViX Zeus-Enigma2 GIT CHANGELOG

openvix: build 892
[InfoBarGenerics] fix typo.
openvix: build 891
[MovieList] check for write access before creating Trashcan.
Merge remote-tracking branch 'pli/master'
fix change log
openvix: build 867
use channel/frequency option in dvb-t for single transponder only
Satconfig: small change required for the new 64 LNBs feature
Merge commit 'f379adc2e0b18d9322ac16d5492dd8453ac36fc0'
Standbyled proc uses on/off instead of yes/no
NimManager: Second try to solve the rotor issue after adding 32 LNBs
[FastScan] do no enable autoscan as default, should be user choice.
[trashcan] fix issue with autofs.
added rotated line around origin into canvas
Merge remote-tracking branch 'pli/master'
Fix AvSwitch
Add aac_transcode to av-settings
NimManager: we have now 64 satellites, so declare an extra 32
Add option to change behaviour of power LED (ET8K/ET10K)
[Translations] NL Update.
openvix: build 890
MovieSelection: remove more screensaver stuff
Revert "Add screensaver to MovieSelection for playing MP3s"
Screensaver: change to a screensaver that ask less resources
freesatv2.cpp: Fix unsigned/signed char errors
eptrlist.h: Fix compilation error on unqualified 'insert'
NimManager: make not available translatable
NimManager: try to allow 64 sat positions
encoding.conf: add fallback encoding for 'ell' (Greek)
[AVSwitch] fix incorrect syntax.
 [AVSwitch] allow to change videomode for giga plus boxes (with new driver)
[UsageConfig] do not disable Alpha support for other brands than vuplus.
Correctly refocus to next to played service
Solve a debug code I used to test the screensaver
Add screensaver to MovieSelection for playing MP3s
Small obtimalizations to InfoBarScreenSaver
[StbHardware] add needed RTC check for INI.
[dvbtime] try to fix a few issue with older GB model and timers.
[infobar] fix issue with TV / Radio mode switching.
[SoftwareUpdate] fix helios e2 log view.
NimManager: In the previous commit I forgot to change a config
NimManager: change default rotorpositions from 49 to 99
[PluginBrowser] when installing a 2nd bootlogo from feed inform user that one is already installed, and give the option to remove the previous installed version.
[PluginBrowser] stop 'meta' packages from showing.
[opkg] fix updating, compiling lists.
[MovieSelection] move some config option from recordings to MovieList setup.
[MovieSelection] add confirmation question when moving a folder to trash.
[SoftwareUpdate] fix imagever when image is '001'
[MovieSelection] if trashcan is used, make sure it is created when open the folder/device.
[MovieSelection] fix Move label when on folders.
[mytest] add support for /etc/enigma2/radio.mvi
[TimeShift] move CleanTimeshift check to run as timeshift activates, in the hopes it will stop hdd spinning up when not using AutoStart.
MovieSelection: move selection down when playing next audio file
[Epglist] fix possible BSOD.
Do not show timeshift protection when no services are in the history
[ipkg] fix typo causing BSOD.
Small changes to the VFD display layout of VUDUO2/ET8K/ET10K
[compile] fix build for latest oe-core merge.
[SwapCheck] fix typo, should be < 5mb free not 50mb.
Fastscan: Start fastscan after 90 seconds in standby instead of 10 min
Add timeshift protection to zap to previous service with '0'
openvix: build 889
FastScan: Reload fastscan each 24 hours as long box is in standby
[ipkg] fix possible BSOD.

OE-ALLIANCE GIT CHANGELOG

[vuplus-opera] reverse Commit: dc12194fd9602ee3ffe8401d70a1530d85d7ebfd as it fails to start.
openvix: build 004
openvix: build 003
openvix: build 002
[vuplus-opera] update browser.
[azboxhd] fix compile lcd.cpp
* cleanup build remove wrong use of TARGET_FPU  this is not needed for all bcm chips this was configure in the mips-tune boxes with soft must build fresh
[AudioEffect] only set provides for needed machines.
[busybox] fix complie on older Kernel add upstream iplink fix
[dm800] fix kernel install fix missing folder
[Gigablue] enable enigma2-plugin-systemplugins-audioeffect gb800se/ue plus
[openATV] update Bootlogo 4.1
[gigablue] add enigma2-plugin-systemplugins-audioeffect for quad and quadplus
openvix: build 001
[openmips] switsch Distro to 4.1
Update enigma2-plugin-extensions-iptvlistupdater.bb
[gigablue - seplus,ueplus, quad, quadplus] - Update drivers FIX single sat with diseqc a FIX aac downmix with pioneer avr. ADD pcm multichannel from ac3/aac/dts. ADD aac transcode to ac3/dts. ADD audio feature    1. /proc/stb/audio/multichannel_pcm        if set enable then ac3/aac/dts will be worked multichannel pcm.    2. /proc/stb/audio/aac_transcode       if set ac3/dts then aac will be converted ac3/dts
[dm800] update arch
[distros] update image task after rootfs
[xtrend] et8k and et10k update drivers 18.4.2014
[nfs-utils] fix for older kernel, also adjust nfsserver start order.
[distros] update image infos for new bb version
[ntfs-3g-ntfsprogs] add util-linux to depends fix missing uuid.h header files
[vuplus] update driver Duo2/Ultimo 20140418  - Fix DVB-S2 Single(AVL6211) tuner problem (duo2, ultimo)  - Change nim_sockets of DVB-T2 tuner (duo2)
[gigablue - quad, quadplus] - Update drivers FIX tuner configuration mode "simple", mode "single"
[kernel] make sure NFS is embedded into kernel.
[3rd-party plugins] Update
[3rd-party plugins] Update
new splash.bin
[odin] fix small issue drivers 15.4
[dags] update drivers and kernel
update wifi for ini box
[odin] E3HD and M7 Update drivers 15.04.2014,
[openvix] bootlogo fix typo's
[openvix] fix bootlogo bb
[openvix] fix softcams bb
[openvix] fix softcams bb
[openvix] fix bootlogo bb
[openvix-softcams] fix bb.
[openatv] switch distro to 4.1
[blackbox] update drivers 11.4.2014
[openvix] Helios release.
[openvix] bootlogo add some additional bootlogo's.
[openvix] bootlogo switch to new Helios logo.
[openvix-softcams] add mgcamd138.
[xtrend] fix preferred linux version for et8k/et10k
[vix-core] don't overwrite exports on update.
[oe-a-skins] add Blue-HD by Rossi
[oe-a-skins] update fro new locations.
[gigablue] add initrd zu image zip file
[gigablue - seplus,ueplus, quad, quadplus] - Update initrd.bin initrd.bin - shortinfo: * requires new bootloader (CFE) - will be released shortly * CFE checks if initrd.bin is available in gigablue/{machine}/initrd.bin    * If yes, CFE loads initrd.bin and flashes image using USB 2.0 instead of 1.1    * If no, CFE flashes image normally using USB 1.1 * Old bootloaders do not check existence of initrd.bin - so it does not harm if shipped in image, just no effect then
[openvix] bootlogo fix bitbake.
[gigablue - seplus,ueplus, quad, quadplus] - Update drivers
[dreambox] update kernel patch sum
[netatalk] fix warning message.
[transmission] fix typo.
[openvpn] fix debug warning message.
[openvix] bootlogo fix bitbake.
[openvix] bootlogo fix bitbake.
[transmission] fix warning message about files not packaged.
[netatalk] fix warning message.
[openvpn] update to 2.3.3
[inadyn-mt] update to v.02.24.38
[OpenXTA] Fix image build with new build env
[openvix] prepare support for bootlogo packs.
[layer] Set ver to 2.1
Revert "[feeds] do not build MediaTomb for feeds as it does not compile."
Fix build of mediatomb
Fix configure error
[filesystems] update ntfs-3g-ntfsprogs to 2014-02-15
[dreambox update kernel to 2.3.56 [dm8000] update drivers 20140314
[openvix] softcam mgcamd fix checksum.
Merge remote-tracking branch 'origin/branding' into 2.1
[feeds] do not build MediaTomb for feeds as it does not compile.
remove addonopendroid
[core] updates for Oe-Alliance version 2.1
[qaud and qaudplus] change mtd to -c 4000 to fix boot stops
changed distro and config opendroid for testings.....
fix typo last commit
[dags3] fix spash1-3 bmps
[dags3] add new flash info splash1.bmp splash2.bmp splash3.bmp
Update enigma2-plugin-extensions-iptvlistupdater.bb
[openoam] fix indention, please make sure you follow indentation rules.
[axassuport] fix indention, please make sure you follow indentation rules.

Images can be downloaded directly from the OpenViX server ( Link Below )
or via a online update
menu> setup> software update.

or via a telnet session with the following command

init 4 && opkg update && opkg upgrade && init 6

OpenViX-Zeus-Enigam2 GIT CHANGELOG
[Only registered and activated users can see links. ]

OE-ALLIANCE GIT-CHANGELOG
[Only registered and activated users can see links. ]


OpenViX-IMAGES
[Only registered and activated users can see links. ]

OpenViX Tutorials
[Only registered and activated users can see links. ]

[Pale-Rider]

OpenViX-Helios 006 AVAILABLE NOW

OpenViX Zeus-Enigma2 GIT CHANGELOG

openvix: build 894
[ServiceInfo] try to read driver for information first, as GSTREAMER can have trouble reading media files (mkv, avi, etc)
[skins] use 'IsHD' instead of detecting size.
[Transponder] add some DebugInfo, to help with ABM DVB-T
openvix: build 893
[VideoMode] only show AutoRes label when AR is enabled.

OE-ALLIANCE GIT CHANGELOG

openvix: build 006
openvix: build 005
[vuplus-opera] reverse Commit: dc12194fd9602ee3ffe8401d70a1530d85d7ebfd as it fails to start.

Images can be downloaded directly from the OpenViX server ( Link Below )
or via a online update
menu> setup> software update.

or via a telnet session with the following command

init 4 && opkg update && opkg upgrade && init 6

OpenViX-Zeus-Enigam2 GIT CHANGELOG
[Only registered and activated users can see links. ]

OE-ALLIANCE GIT-CHANGELOG
[Only registered and activated users can see links. ]

OpenViX-IMAGES
[Only registered and activated users can see links. ]

OpenViX Tutorials
[Only registered and activated users can see links. ]

[Pale-Rider]

OpenViX-Helios 007 AVAILABLE NOW

OpenViX Helios-Enigma2 GIT CHANGELOG

openvix: build 895
Merge remote-tracking branch 'pli/master'
frontend: make plp id available in transponder data
frontend: consider DVB-T2 plp id in transponder comparison
enigma2.bb: inherit pythonnative
enigma2.bb: fix indentation in populate_packages_prepend
[ServiceInfo] fix return values.
PositionerSetup: Solve allocating unused memory index when use USALS
[Satconfig] Hide coordinates options if not USALS

OE-ALLIANCE GIT CHANGELOG

openvix: build 007
[vuplus] driver update (Solo2/Duo2) 20140424
[blackbox] update drivers and kernel HDMI-cec Recording on scrambled channels PiP DVB-T Tuner improvments DVB-S2 tuner improvments RCU Acceleration and Speed
fix SABnzbd python compileall

Images can be downloaded directly from the OpenViX server ( Link Below )
or via a online update
menu> setup> software update.

or via a telnet session with the following command

init 4 && opkg update && opkg upgrade && init 6

OpenViX-Zeus-Enigam2 GIT CHANGELOG
[Only registered and activated users can see links. ]

OE-ALLIANCE GIT-CHANGELOG
[Only registered and activated users can see links. ]

OpenViX-IMAGES
[Only registered and activated users can see links. ]

OpenViX Tutorials
[Only registered and activated users can see links. ]

[Pale-Rider]

OpenViX-Helios 010 AVAILABLE NOW

OpenViX Helios-Enigma2 GIT CHANGELOG

openvix: build 898
openvix: build 897
Merge remote-tracking branch 'pli/master'
[Tools] Trashcan, add some debug to help find a bug.
Update de.po
NimManager/Satconfig: add latest suggestions from Dima73
openvix: build 896
Fix possible GSOD with VirtualKeyBoard when using SMS style
NimManager: Solve another possible issue with the 64 LNBs feature

OE-ALLIANCE GIT CHANGELOG

openvix: build 010
openvix: build 009
[e2-dvb-driver] add missing depend.
openvix: build 008

Images can be downloaded directly from the OpenViX server ( Link Below )
or via a online update
menu> setup> software update.

or via a telnet session with the following command

init 4 && opkg update && opkg upgrade && init 6

OpenViX-Zeus-Enigam2 GIT CHANGELOG
[Only registered and activated users can see links. ]

OE-ALLIANCE GIT-CHANGELOG
[Only registered and activated users can see links. ]

OpenViX-IMAGES
[Only registered and activated users can see links. ]

OpenViX Tutorials
[Only registered and activated users can see links. ]

[Pale-Rider]

OpenViX-Helios 011 AVAILABLE NOW

OpenViX Helios-Enigma2 GIT CHANGELOG

openvix: build 899
[Tuner config] Add some python comments so changes aren't lost on PLi merge
[Satconfig] Capitalise modes in nim selection screen. Change 'Loopthrough' to 'Loop through', requested by Rob.
[Satconfig] Capitalise 'Configuration mode' options. Requested by Abu.
[Satconfig] Confirm delete satellite: set default to 'no'. Requested by Abu.
[Translations] NL update.
[Satconfig] in 'Advanced' hide 'DiSEqC 1.1 repeats' when 'DiSEqC 1.1 command' is set to 'None'
[tuner config] Move elements into a more logical order, and rename some items to make this screen more user friendly
[tuner config] Remove 'Enable DiSEqC' from 'Simple-single'
[NimManager] Limit committed inputs to four as per DiSEqC standard
Possibility to skin spinner. Just make a dir YourSkinName/spinner and put there wait1.png, wait2.png.........

OE-ALLIANCE GIT CHANGELOG

openvix: build 011
[apr] update to version 1.5.1 [apr-utils] update to version 1.5.3
[subversion] update to version 1.8.8
[beautifulsoup] update to version 4.3.2
[hbbtv] fix play state error on VOD
branding update for last branding lib change
rename visionnet to marvel1
[visionnet] update image dir to marvel1
changed number build and mod skin default opendroid
[skin] pli-hd skin fix lic
[skin] PLi-Full-HD-Night fix build
rename opendroid feeds for test
[3rdparty] fix build
[pngquant] set rev to ee7bef8644ad1bac3fce2c04afef13f1ec19166b
rename evo to entwopia-dvb-modules-ew7358.bb
[Build] opendroid Test.
edit skin defautl
[3rd-party plugins] Update
[pli-full-hd-night] fix LIC location.
[oe-alliance-skins] remove pli-hd and add pli-full-hd-night, if you ant old pli skin for you image please add it to you dristro feeds bb.
[3rd-party plugins] Update
[3rd-party plugins] Update
[3rd-party plugins] Update
changed skin and spinner
edit recipes-distros
[openvpn] update to 2.3.3
[distros] update image task after rootfs
cleanup dead distro
add pluginnowanted - skinsnowanted and VFD patch
edit conf and distro opendroid
[openpl] remove old skin plugin
[odinsupport] update for new skin: enigma2-plugin-skins-odin-hd-metrixlite
Update enigma2-plugin-extensions-iptvlistupdater.bb

Images can be downloaded directly from the OpenViX server ( Link Below )

via a online update
menu> setup> software update.

OR

Via a Telnet session with the following command
init 4 && opkg update && opkg upgrade && init 6


OpenViX-Zeus-Enigam2 GIT CHANGELOG
[Only registered and activated users can see links. ]


OE-ALLIANCE GIT-CHANGELOG
[Only registered and activated users can see links. ]


OpenViX-IMAGES
[Only registered and activated users can see links. ]

OpenViX Tutorials
[Only registered and activated users can see links. ]

Follow us on Twitter [Only registered and activated users can see links. ]

Follow us on Facebook [Only registered and activated users can see links. ]

[Pale-Rider]

OpenViX-Helios 013 AVAILABLE NOW

OpenViX Helios-Enigma2 GIT CHANGELOG

openvix: build 901
[branding] cleanup makefile for branding, as now a lot of machines are shared.
[TunerConfig] Revert previous commit on concensus. This is not a simple configuration item.
Merge remote-tracking branch 'origin/master'
[tuner config] Revert previous commit on concensus, as this is not a 'Simple' config item.
[tuner config] Revert "Remove 'Enable DiSEqC' from 'Simple-single'" as some multi-switch setups require this
[Satconfig] hide descendant options not related to current config, and remove a possible bug from 'Command order'
[EpgList] add option set alignment for timeline i.e. TimelineAlignment="right"
Update de.po
[CommonInterfaceAssignment] fix BSOD.
set the linux OOM score for the enigma2 process.. so the kernel first kills other processes on low memory conditions...
Merge remote-tracking branch 'pli/master'
openvix: build 900
added 23.5E 12207V into encoding.conf
added select sorting list in movieplayer from choicebox and added posibility place this under programeable button too
UsageConfig: Optimize some code related to enigma2 imports
Use timeout_default when changing remote control type
Add timeout_default for sleeptimer and inactivitytimer
MessageBox: Add timeout_default functionality
Satconfig changes as suggested by Huevos

OE-ALLIANCE GIT CHANGELOG

openvix: build 013
[dags] driver updates:
[dags] cleanup machine INC, and add TM-NANO 2 Super.
edit recipes-distros opendrox for test.
[valis-hd] fix the depend.
[gstreamer] prevent accumulation of old cached buffers in input-selector.
[dags] drivers update
Added Beyonwiz distro
[skins] fix font-valis depend.
[python-lxml] fix build.
[python-lxml] add missing depend.
[python-cssselect] fix install.
openvix: build 012
[python-cssselect] fix lic checksum.
[python-cssselect] add recipe.
[subversion] degrade to 1.7.16, as 1.8.8 is not compatible with OpenEmbedded.
[3rd-party plugins] Update
[ixuss] update drivers 20140430 * update  Doscam support * fix scam 3.59 * fix scam 3.50 info scam 3.53 not working please use 3.59 or 3.60
changed bootlogo
Merge branch '2.1' of https://github.com/oe-alliance/oe-alliance-core into 2.1
edit recipes-distro and conf

Images can be downloaded directly from the OpenViX server ( Link Below )

via a online update
menu> setup> software update.

OR
Via a Telnet session with the following command
init 4 && opkg update && opkg upgrade && init 6

OpenViX-Zeus-Enigam2 GIT CHANGELOG
[Only registered and activated users can see links. ]

OE-ALLIANCE GIT-CHANGELOG
[Only registered and activated users can see links. ]

OpenViX-IMAGES
[Only registered and activated users can see links. ]

OpenViX Tutorials
[Only registered and activated users can see links. ]

Follow us on Twitter [Only registered and activated users can see links. ]

Follow us on Facebook [Only registered and activated users can see links. ]

[chewie]

Hello Pale-Rider
I try the update and was not able to do it by via a online update, is the server down?
Regards.
Chewie

[Pale-Rider]

sorry mate, was mad busy yesterday so didn't get the chance to update things.

Basically we found a issue in build 014 I believe and set the feeds to unstable as a result, you can still access the feeds but you would have to enable the "allow unstable updates option" in the image, A fix has been made for the issue and should either be building or has already been built, not sure which yet as i just got into work for the day.