Thread: Technomate 5302
Results 31 to 40 of 42
-
-
02-14-2014,09:39 AM
In addition to 11960 V 2500, there is an 11962V 3333. Transponder. Then you have the skinny 11984V 1100 DVB-S2 transponder. Is anybody getting all three of these transponders in a single blindscan?
.
.
.
Meine Dreambox One ist ein Stück Scheiße!.
-
-
02-14-2014,11:01 AM
The 1160 and 1162 transponders will be a big challenge for any fta receiver because they are spaced close together and are on the same polarization. The guard interval is supposed to be 2 Mhz each side of a transponder for a total of 4 Mhz between transponders. A lot of fta receivers will get confused trying to scan these two transponders.
.
.
.
Meine Dreambox One ist ein Stück Scheiße!.
-
02-14-2014,11:26 AM
The 2 channels that didn't scan in on the x2 after numerous blind scans:
Monte Carlo Tv- 11916 V 2150
Canal 9- 11960 V 2500[/QUOTE]
Montecarlo is a live temp feed usually an hour or so. Canal 9, C11 Salta and Telemovil 5 come up find on my X2 blindscan. A very good challenge will be KCHF-TV and My Family TV on 99W C band both real closeX2 Premium III HD, Openbox X5/ S10, Gsky V3/V6, iSmart m100
-
-
02-14-2014,12:39 PM
11962 Solo Tango and 11960 locked in but I do get a bit of signal on the 11984 tp but not enough to scan it in. I'll add to the sat list.
-
02-14-2014,01:39 PM
One thing that I've noticed with the TM 5302 is that it sorts new channels and tp accordingly, no need to move things around as it is done automatically.
-
04-30-2014,04:29 PM
So Costa is this the most sensitive tuner yet? I like the fact that it shows the modulation.
Portable Comtech 13', Winegard 10', SAMI 7.5', 3 39" Ku dishes one motorized. Scanning 30w-131w
-
05-01-2014,09:26 AM
Dollar for dollar, the best fta receiver I have ever tested. Tuner sensitivity is off the charts and its blind scan is fast if you use a high step but I prefer to take it a bit slower as it will not miss any tp and it will lock in even the weakest of signals.