Page 1 of 2 12 LastLast
Results 1 to 10 of 18
  1. Collapse Details
    X2 Premium HD for Central America
    #1
    Join Date
    Jan 2014
    Posts
    7
    Post Thanks / Like
    Contribute If you enjoy reading the
    content here, click the below
    image to support our site.
    Click Here To Contribute To Our Site
    Hello all:

    I am new to this site and to X2 premium HD but not to FTA. I used to live in Florida, now I live in Central America. I recently purchased an X2 Premium HD. I got my dish pointing @ Intelsat 1R 50.0°W. When I scanned for channels I got 37 in my region (Nicaragua) and on my tv screen said scrambled channels. Can someone please point me in the right direction. What I am doing worng?
    Reply With Quote
     

  2. Collapse Details
    #2
    Join Date
    Feb 2011
    Location
    New England
    Posts
    3,550
    Post Thanks / Like
    Hi nightwolf, welcome to Legit. If you browse some of Costa's Atlantic C-band arc threads you can see what channels he picks up on 50w. I am not familiar with what is available in Central America for FTA but there are a lot of channels on 40.5w, 55.5w and 58w. Are there any channels you expect to get on 50w? Just make sure on the blind scan you scan for FTA or all.
    Portable Comtech 13', Winegard 10', SAMI 7.5', 3 39" Ku dishes one motorized. Scanning 30w-131w
    Reply With Quote
     

  3. Collapse Details
    #3
    Join Date
    Jan 2012
    Location
    nutmeg state
    Posts
    637
    Post Thanks / Like
    check lyngsat.com for the channels/beams in your area
    or am I being obtuse?
    Reply With Quote
     

  4. Collapse Details
    #4
    Join Date
    May 2011
    Posts
    5,807
    Post Thanks / Like
    Hello nightwolf75 and welcome to legitfta!!

    Are you trying C or Ku band?? What dish size and LNB are you using??

    Let us know your configuration so we c an help
    X2 Premium III HD, Openbox X5/ S10, Gsky V3/V6, iSmart m100
    Reply With Quote
     

  5. Collapse Details
    #5
    Join Date
    Dec 2012
    Posts
    9,278
    Post Thanks / Like
    I'm assuming you are on c band where there are many open channels but also a slew on encrypted ones as well. Enlace is the only open channel on ku at 50w. There plenty of open channels on several sats on the atlantic side like:

    22w
    27.5w
    40.5w
    50w
    55.5w
    58w
    61w

    and the American side of sats if you can get them from your location. I will scan Intelsat 1R at 50w a bit later on and report back.
    Reply With Quote
     

  6. Collapse Details
    #6
    Join Date
    Dec 2012
    Posts
    9,278
    Post Thanks / Like
    A scan of Intelsat 1R at 50w gave me 22 open channels. Just a note that this linear sat was scanned with a circular feed, I will send my 10' bud over later and report back.
    Reply With Quote
     

  7. Collapse Details
    #7
    Join Date
    Dec 2012
    Posts
    9,278
    Post Thanks / Like
    Just sent my 10' bud over to 50w with a linear feed, 32 open channels. Plenty of open channels on the Atlantic side as long as your dish is big enough for c band and with the proper feed of course.
    Reply With Quote
     

  8. Collapse Details
    #8
    Join Date
    Jan 2012
    Location
    nutmeg state
    Posts
    637
    Post Thanks / Like
    the north american ku beam is around 100 channels but all nagra3 if I remember correctly.
    the central america ku may be the claro tv also,maybe even the same channels scrambled.
    Maybe try a different sat to aim for.
    or am I being obtuse?
    Reply With Quote
     

  9. Collapse Details
    #9
    Join Date
    Jan 2014
    Posts
    7
    Post Thanks / Like
    Hello Carlospr43,

    I am using a 41 inch dish. Trying to capture KU Band and the LNB is an X2 LNB Premium HD.
    I am in the west coast of Nicaragua. I have X2 Premium HD Receiver. I don't know what configurations I have. What is the username and password for the ftp site to upgrade the receiver with the files and channels?
    Reply With Quote
     

  10. Collapse Details
    #10
    Join Date
    Jan 2014
    Posts
    7
    Post Thanks / Like
    Hello dr. zin,

    The sat I am trying is Intelsat 1R @ 50W with a 41 inch dish and X2 LNB Premium HD and Premium HD Receiver. I setup my receiver to connect to my home network wirelessly but I don't know the usr/passwd to update my receiver. Is there another way to update my receiver with unscramble channels with claro tv ku band?
    Reply With Quote
     

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •