Results 1 to 6 of 6
  1. Collapse Details
    BlackHole with Multiboot
    #1
    Join Date
    Feb 2012
    Posts
    7,247
    Post Thanks / Like
    Contribute If you enjoy reading the
    content here, click the below
    image to support our site.
    Click Here To Contribute To Our Site
    Just tried mms streaming and it works very well.

    BLACK HOLE Vu+ 2.0.8

    What'snew:
    • New Vu+ drivers 16 december 2013
    • New Skin MX SkyLine By Matrix10
    • New Bootologo IOS 7 Style by mikark
    • Support wmv, wma, asf media file (duo, solo and uno have to be enabled in BhSpeedUp)
    • Update OpenWebIf
    • BhEpgPanel: Change internal openepg default channel to Nat Geo
    • Update languages fr, no, sv
    • Add Audio Effect Plugin
    • Transcoding: support multiple encoders
    • Transcoding: support resolution setting , and advanced setup
    • A/V settings: update.
    - add "AAC downmix" setup
    - fix entry name, Dolby Digital downmix -> Dolby Digital / DTS downmix
    • gstreamer plugins updated:
    - added support for mms protocol.
    - added patch related on rtsp.
    • Transtreamproxy updated
    • Support more video codecs in media playback (OE 2.1 gstreamer)
    • Reduce First picture display time (zapping time improvement : duo2, solo2)
    • Support dual transcoding (duo2, Only 2nd transcoding is mutually exclusive with PIP)
    • Improve PCM playback (solo, duo, uno, ulitmo)
    • Support 3D surround (solo, duo, solo2, duo2)
    • Support AVL (automatic volume leveler) (duo2, solo2)
    • Support more proc entries to control duo2 transcoding
    • Improve temperature control of dual tuner when not in use (duo2, uno, ultimo)
    • FPGA update in solo2(done automatically in the first bootup after installation)
    • Fix EOS deteciton in media(PCM) & TS playback
    • Support AAC passthrough
    Last edited by eastof111; 10-30-2016 at 10:27 PM.
     

  2. Collapse Details
    Black Hole 2.1.2
    #2
    Join Date
    Feb 2012
    Posts
    7,247
    Post Thanks / Like
    The latest from the BH Team:

    New skin MX Black Speed
    Duo2 drivers: fix dual DVB-T2/C tuner in changing mode
    Update languages: es, no
    Updated MediaTree (all dvb usb drivers)
    Updated OpenWebIf
    [hbbtv] Update and fix crash
    [ScanSetup] Support TT3L10 automatic scan.
    [TransCodingSetup] fix set config bug and wrong description.
    [ScanSetup] dvb-t2 channel should be searched using scan app. & fix typo.
    fix vuplus-blindscan-utils
    Support dual DVB-T2/C Tuner automatic scan
    Adjust bmem in duo/solo
    - To support 1080 FB
    update drivers
    20141021
    - Support 1080 Framebuffer(duo/solo need kernel update)
    - Support Dual DVB-T2/C Tuner(uno, ultimo, duo2)
    - Support 4 vtuners(solose, vtuner is mutually exclusive with transcoding)
    Added rtl8812au driver to the image (DWA.182 Rev A1 dongle works GREAT!)
    Added isofs module in images with kernel 3.9.x are always compiled as a module (M)
    [rt3070] added support for DWA-140 rev D1 (experimental)
    Fix WOL problem in duo2
    update drivers
    20140925(duo2, solo2, solose)
    - Fix HDMI problem in some AV receivers
    - Fix WOL problem(duo2)
    - Fix AGC/SNR display(SSH108)
    - Fix misc bugs.
    [rtl8812au] changed drivers from Edimax to GitHub
    [rtl8188eu] Updated driver to the last commit available
    Update driver
    20140829(solo2, solose)
    - Fix transcoding problem(solo2, solose)
    - Optimize memory usage(solo2)
    [vuplus-webmanual] fix incorrect output for solose.
    update drivers
    20140808(duo2, solose, uno, ultimo)
    - Improve DVB-C/T(CXD1978) tuning performance
    fix uno/ultimo harddisk detection
    fix slow network

    This Image has the latest drivers and CAN NOT be installed in multiboot. The image MUST be installed in flash.

    Black Hole does not support images not installed in flash.

    This latest version of the Black Hole series has been entirely rewritten and improved in the code for maximum stability and performance.

    Please note that of all images Black Hole now has the best epg system:

    - Integrated OpenEpg

    - Rytec dedicated epg.dat

    - New system epg.dat outside.

    DISCLAIMER

    THE BLACK HOLE IMAGE IS BASED ON THE OFFICIAL FIRMWARE PUBLISHED BY VU+ AND IN ACCORDANCE WITH THE LAW IT CONTAINS ONLY SYSTEM ADDITIONS & GRAPHIC CHANGES.

    THE BLACK HOLE IMAGE DOES NOT CONTAIN ANY EMULATOR, K E Y S, SOFTCAMS OR OTHER SYSTEM FOR VIEWING PAY - TV WITH OR WITHOUT A PAID SUBSCRIPTION.

    LASTLY, THE BLACK HOLE IMAGE DOES NOT CONTAIN ANY SYSTEM TO DOWNLOAD PLUGINS OR EMULATORS FROM EXTERNAL SERVERS OR SOFTWARE THAT MAY BE USED FOR ILLEGAL PURPOSES SUCH AS CARD SHARING.
     

  3. Collapse Details
    #3
    Join Date
    Feb 2012
    Posts
    7,247
    Post Thanks / Like
    Black Hole 2.1.3 Universal Meoboot​

    MeoBoot updated and now compatible with all major images
    New Army skin DarkSky
    New fade effect in osd
    OpenWebIf updated and added Italian translation
    Httpstream updated:
    - added chunked transfer support.
    - connect to TS stream in seperate thread.
    - add basic http authentication support.
    - add redirect and playlist support.
    Elistbox: add setFont function (workaround for Full Hd skins)
    media-tree rebuilded module list
     

  4. Collapse Details
    #4
    Join Date
    Feb 2012
    Posts
    7,247
    Post Thanks / Like
    What is new in Black Hole 2.1.4:

    All models: Full HD Skin ready.
    The 1920x1080 framebuffer support recently introduced in Vu+ drivers has made it possible to use full hd skins. But many parts of the enigma2 gui are hardcoded with fixed fonts and itemheight.
    This causes fonts at 1920x1080 resolution to appear far too small. All these gui parts have been re-coded in Bh 2.1.4 to support larger fonts and itemheight in case of full hd skins (thx to Matrix10)

    Solo and Duo only:
    The 1920x1080 framebuffer support has required extra Ram usage. For this reason the old Solo and Duo models do not have enough free ram to run the curent images with these new features.
    In Black Hole 2.1.4 we have included ram compression (zram) that increases performance by avoiding paging to disk and using a compressed block device in RAM instead, inside which the paging takes place until it is necessary to use the swap space on a hard drive or usb stick. Since using ZRAM is an alternative way to provide swapping on RAM, zram allows Linux to make more use of RAM when swapping/paging is required.

    misc:

    drivers:
    201412005(zero, solose)
    - Improve PQ(zero)
    - Adjust LED brightness(solose, zero)
    update driver
    20141201(solose)
    - Fix analog audio(solose)
    drivers: 20141126(solose, zero)
    - Fix booting problem(solose)
    - Support LED brightness control in idle mode(solose)
    - Support LED brightness control in normal/idle(zero)
    - (Brightness can be controlled in Menu -> Setup -> System -> Display Setup)
    New Skin MX-Black
    Meoboot update: Fixed the issue of non working usb drivers in images in multiboot.
    About screen: Add drivers version, kernel version and Cpu info.
    Bh Full Backup update.
    OpenWebInterface update.
    WirelessLanSetup: add quote to wpa_passphrase for password.
    Black Hole Swap panel: Allow to create swap files upto 2 GB.
    Black Hole Swap panel: Update descriptions (Thx to Ev0).
    Solo2: fix ethernet problem in some Gigabit switches.
    Solo/Duo: implement Zram
    Librtmp update.
    Added to feed: livestreamer, livestreamersrv
    Added to feed: python-mechanize python-futures python-pip python-requests python-singledispatch
    [PATready] 'cnt' is increased twice, causing failure to obtain a single pmtpid.
    [VirtualKeyboard] fix default layout (en) must be "qwerty"
    Bh Device Panel: fix meoboot mointpoint only when meoboot is installed
     

  5. Collapse Details
    #5
    Join Date
    Feb 2012
    Posts
    7,247
    Post Thanks / Like
    Black Hole 2.1.5​


    New: HQ 5 Full Hd Skin 1920x1080 (duo2, solo2, soloSe, uno, ultimo, zero)
    New: OpenGL animations and Xbmc (duo2, solo2, soloSe)
    All drivers updated
    fix autoresolution plugin
    [hbbtv] fix crash parsing xml
    [hbbtv] fix VOD play problem
    fix keymap bug
    fix channel skip
    change default resolution to 1920x1080 (only models with full hd skin)
    update languages hr, it, no
    meoboot: add support for OpenGL and Xbmc images
    update Usbtuner
    WIFI: update driver RTL8188EU
    WIFI: update driver RTL8812AU


    Warning: This image MUST BE INSTALLED IN FLASH.
    Warning: Don't mix images with OpenGL animations and images without animations in multiboot because they use different drivers. If you have an OpenGL image in flash you can only use OpenGL images in Meoboot.
    Warning: Previous personal backups are not compatible with this image. Please use software manager to backup your settings before you flash.

    Known Issues: Xbmc External Player not working yet.

    Note for Meoboot and OpenGL images:
    Because OpenGL images have a different boot procedure and the framebuffer is loaded at the end of rcS it is not possible to have the Bootmenu.
    For this reason to change image you have to go into Meoboot plugin, select the image you want to boot and click on "Boot Image" button.
     

  6. Collapse Details
    #6
    Join Date
    Feb 2012
    Posts
    7,247
    Post Thanks / Like
    Black Hole 2.1.6

    What is new:

    Support for Picons in channel list
    New Skin Matrix MX HQ7
    Add vuplus-tuner-turbo drivers
    update drivers
    20150302
    - Fix DVB-T tuner detection in new E2 frontend
    - Fix misc bugs.
    update drivers
    20150317
    - Support new Gstreamer sink interface(OE update will follow)
    update proxy drivers and utils
    20150318
    - Fix resolution problem when 720P skin is in use
    update drivers
    20150403
    - Fix problem in new Gstreamer interface
    update drivers
    20150406(duo, solo, uno, ultimo)
    - Support satip(OE update will follow. Other models are already supported)
    update drivers 20150511
    - Fix tuner status information
    - Fix loop through(solose v2)
    - Fix Scart(duo2)
    [hbbtv] support gstreamer-1.0 (1.5.4)
    Add Cache / CacheEX button
    Implement gpixmap scale function
    Add support for picons by name
    [Animationsetup] change default to simple fade
    Update languages: Italian, Norwegian
    fix Dual DVB-T2/C automatic scan problem


    WARNING: This Image has the latest drivers and CAN NOT be installed in multiboot. The image MUST be installed in flash.
    Black Hole does not support images not installed in flash.
     

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •