I am trying to use my X2 as my primary receiver for both c-band (using vbox7 and ku band using USALS motor) , but just can't figure out how to assign a diseqc motor position number to a particular satellite (using DMC vbox7) rather than let the X2 simply assign them in numerical sequence. If I can't do this, then any suggestions on exactly how to change the satellite list and include these motor numbers and then write them back to the X2.
All suggestion sincerely appreciated.
Results 1 to 10 of 20
Hybrid View
-
How to reassign motor numbers on X2 Premium HD – 11-14-2013,08:08 PM------------------------------------------------------------------------------------------------------------------------------------------------------
C-band since 1980. 12 ft Paraclipse bought new. Dual Tuner AzBox Premium HD+. FW is 0.9.5311 (reads 0.9.5308 on the AZBox).
X2 Premium HD SW Ver: r2890-32202607 -xs0 Date: Sep 24 2013. Two 1mtr Wingard Dishes with STAB HH-120 motors.
Titanium Satellite ASC-1 dish positioner, Chaparral Co-rotor feedhorn. 24 inch Thomson Saginaw Ball Actuator.
-
11-14-2013,10:04 PM
el bandido has already answered the first question: [Only registered and activated users can see links. ]
Although I am sure several receivers do not have the capability to assign motor positions, fortunately this is the only one I own that does not. It should probably be added to the requested features as the motor menu looks like it was set up to do this, but just has not been implemented at this time.
I believe Costactc said he only uses the vbox to control the antenna, but that is not an option if the vbox is located in a different room from the receiver as many are.
Without this feature, I do not see how it is possible to use a pre-programmed vbox with the x2 stb. Maybe there is another way to accomplish this.
It is such a good stb, that it puts many others to shame is many areas, and is hard to beat as a great blind scan box!------------------------------------------------------------------------------------------------------------------------------------------------------
C-band since 1980. 12 ft Paraclipse bought new. Dual Tuner AzBox Premium HD+. FW is 0.9.5311 (reads 0.9.5308 on the AZBox).
X2 Premium HD SW Ver: r2890-32202607 -xs0 Date: Sep 24 2013. Two 1mtr Wingard Dishes with STAB HH-120 motors.
Titanium Satellite ASC-1 dish positioner, Chaparral Co-rotor feedhorn. 24 inch Thomson Saginaw Ball Actuator.
-
11-14-2013,10:22 PM
You can manually assign them.
I think you press the OK button on the remote when you have the diseqc 1.2 position highlighted, causing a drop-down box to appear. I do not have my X2 connected at this time because I am working with another receiver but I will try to connect it and verify this info. EB.
.
.
Meine Dreambox One ist ein Stück Scheiße!.
-
11-14-2013,11:02 PM
Thank You, el bandido. That does indeed work as you described. You are a genius!
The count does stop at 64, but you can only check 64 of the satellites to use now!!!
If you are able to get them to update the satellites to 99 and update the motor count to 99, this box will be better than the Azbox in many aspects!!!!
The menu shows OK - Pop when on the Position number, so you can indeed match vbox satellite numbers up to 64 (and hopefully up to 99 one of these days)------------------------------------------------------------------------------------------------------------------------------------------------------
C-band since 1980. 12 ft Paraclipse bought new. Dual Tuner AzBox Premium HD+. FW is 0.9.5311 (reads 0.9.5308 on the AZBox).
X2 Premium HD SW Ver: r2890-32202607 -xs0 Date: Sep 24 2013. Two 1mtr Wingard Dishes with STAB HH-120 motors.
Titanium Satellite ASC-1 dish positioner, Chaparral Co-rotor feedhorn. 24 inch Thomson Saginaw Ball Actuator.
-
11-14-2013,11:23 PM
I would like to have 99 Diseqc 1.2 positions too!
There are some limits that should be noted.
(1) You cannot store the same Diseqc 1.2 position to more than one satellite.
(2) You cannot move a Diseqc 1.2 position once it has been entered.
You will get the position conflict error if you do either of the above.
I suggest setting the diseqc 1.2 positions first before doing anything else.
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
-
11-15-2013,12:03 AM
You solved the hard one. But if you cannot assign the same P number to more than one satellite, I am still in trouble. My satellite list now has 78 fta sats after getting rid of all of the dbs sats.
This list runs from my line of site Intelsat-903C to AMC-8C. I need to get rid of 14 more sats! That is why the expansion from 64 to 99 sats will be valuable to a lot of us in North America.
Can I just re-load the firmware or just the satellite list to get rid of the six that I just stored that need to be changed? I can reset the vbox and re-program all sats, if I have to, but I still need to change the P number on those six sats!
Anyway, thanks so much for hanging around and helping me tonight! The courtesy is much appreciated!------------------------------------------------------------------------------------------------------------------------------------------------------
C-band since 1980. 12 ft Paraclipse bought new. Dual Tuner AzBox Premium HD+. FW is 0.9.5311 (reads 0.9.5308 on the AZBox).
X2 Premium HD SW Ver: r2890-32202607 -xs0 Date: Sep 24 2013. Two 1mtr Wingard Dishes with STAB HH-120 motors.
Titanium Satellite ASC-1 dish positioner, Chaparral Co-rotor feedhorn. 24 inch Thomson Saginaw Ball Actuator.
-
11-15-2013,07:55 AM
i would try editing the database file with ez manager
or am I being obtuse?
-
11-15-2013,03:00 PM------------------------------------------------------------------------------------------------------------------------------------------------------
C-band since 1980. 12 ft Paraclipse bought new. Dual Tuner AzBox Premium HD+. FW is 0.9.5311 (reads 0.9.5308 on the AZBox).
X2 Premium HD SW Ver: r2890-32202607 -xs0 Date: Sep 24 2013. Two 1mtr Wingard Dishes with STAB HH-120 motors.
Titanium Satellite ASC-1 dish positioner, Chaparral Co-rotor feedhorn. 24 inch Thomson Saginaw Ball Actuator.
-
-
11-15-2013,05:21 PM
Yes, I had found that one. It shows all 81 satellite numbers, but the motor Position is limited to 1 through 32. Is there a way to enter motor positions above 32 since the box takes positions up to 64 (and maybe 99 someday)? Are there any updated tools that work for this box or at least for the satellite screen?
------------------------------------------------------------------------------------------------------------------------------------------------------
C-band since 1980. 12 ft Paraclipse bought new. Dual Tuner AzBox Premium HD+. FW is 0.9.5311 (reads 0.9.5308 on the AZBox).
X2 Premium HD SW Ver: r2890-32202607 -xs0 Date: Sep 24 2013. Two 1mtr Wingard Dishes with STAB HH-120 motors.
Titanium Satellite ASC-1 dish positioner, Chaparral Co-rotor feedhorn. 24 inch Thomson Saginaw Ball Actuator.