Interesting boot screen. I don't remember mine having that but the internals look the same.
Thread: MSD 7816 based receiver
Results 51 to 60 of 83
-
03-08-2014,06:36 PMPortable Comtech 13', Winegard 10', SAMI 7.5', 3 39" Ku dishes one motorized. Scanning 30w-131w
-
03-08-2014,07:56 PM
it's a common wallpaper
Last edited by r10fret; 04-09-2014 at 10:26 PM.
-
03-08-2014,09:47 PM
22khz switching function.
Last edited by r10fret; 04-09-2014 at 10:25 PM.
-
03-08-2014,10:01 PM
22khz generator
Last edited by r10fret; 04-09-2014 at 10:25 PM.
-
03-08-2014,10:50 PM
Just renamed the last 3 on the list of 60 pre-loaded satellites.
Last edited by r10fret; 04-09-2014 at 10:21 PM.
-
03-09-2014,01:03 AM
Receiver Factory defaults to PAL mode
Last edited by r10fret; 04-09-2014 at 10:21 PM.
-
03-09-2014,05:14 PM
Tested with motor.
Last edited by r10fret; 04-09-2014 at 10:21 PM.
-
03-09-2014,05:45 PM
The motor control didn't work for me really at all. Sometimes in the menu the motor would take off and not stop. This is an issue that the firmware revisions should be able to address.
Portable Comtech 13', Winegard 10', SAMI 7.5', 3 39" Ku dishes one motorized. Scanning 30w-131w
-
03-09-2014,05:51 PM
I see the mentioned of firmwares revisions for this receivers. Where do you get them from?? Or where can be download?
X2 Premium III HD, Openbox X5/ S10, Gsky V3/V6, iSmart m100
-
03-09-2014,07:25 PM
no official place
Last edited by r10fret; 04-09-2014 at 10:25 PM.