Diseqc 1.1 is not listed in the specs or on the box. I tested a X2 a while ago and I don't remember for sure but I think I had it working in my system with 8 port switches. I got asked about this recently but the X2 I had is since on extended loan to a guy without 1.1 switches to verify.
Results 1 to 7 of 7
-
Can X2 support Diseqc 1.1 switches? – 09-09-2013,09:56 AMC: 8' Andrew w/orthomode feeding twin Norsat 8515, Atemio Nemesis
Ku: 1.2m Channel Master w/orthomode feeding twin NJR universal lnbs, Manhattan
DBS: Motorized DTV Slimline w/DMS 922 circular, Jynxbox Ultra V3
4:2:2 AZminiMe slaved off C/Ku
-
09-09-2013,11:07 AM
I have been using a Digiwave 8x1 switch since July when I got my X2 and it operates perfectly and this was a switch that my microHD had troubles with at times.
I just select from the uncommitted menu to get my eight LNBFs.
-
09-09-2013,11:48 AM
Have also been using Digiwave 8x1 uncommitted switch with X2 and works fine.
-
09-09-2013,11:50 AM
Ok, I thought this was the case. I'll pass it on to the guy asking about it. Thanks.
C: 8' Andrew w/orthomode feeding twin Norsat 8515, Atemio Nemesis
Ku: 1.2m Channel Master w/orthomode feeding twin NJR universal lnbs, Manhattan
DBS: Motorized DTV Slimline w/DMS 922 circular, Jynxbox Ultra V3
4:2:2 AZminiMe slaved off C/Ku
-
09-09-2013,06:35 PM
I thought you had a X2 Pixl.
.
.
.
Meine Dreambox One ist ein Stück Scheiße!.
-
09-09-2013,09:20 PM
He does. If you re-read, he mentions that it's on loan to another person.
-
09-26-2013,10:47 AM
i m using also 8 pin diseq working perfctly