X2 Switch Problems

[Marv]

Turbosat, I looked on Amazon didn't find switches there. I did find them on Ebay. So ordered a couple, Got them today and tried them out. They both worked fine. Thanks for the tip, Know if a couple of firmware problems could be solved things would be great..

[darkness2013]

Hello guys,
I am having an issue with the receiver, in the setup menu the 22khz is greyed out , i want to use it with my zinwell multiswitch.

I have august firmware loaded,multiple factory resets,..am i missing something?

Thanks,

D

[cpr43]

22KHZ is grayed out when you choose a universal LNB. Try changing to standard option. If you still want to use the Universal with the 22khz ON you will need to choose 9750 lnb option.

[darkness2013]

Thank you Carlos, I never thought of that, it worked like a dream. I feel really dumb now. lol

[turbosat]

Glad it worked out for you Marv. Nothings more aggravating than a switch that won't switch!

[cpr43]

Marv, get the Ecoda brand switch, wherever you can find it (amazon??). I had problems with those others you mentioned, with several receivers before the X2. After finally getting the Ecoda-things work much better.

Turbo or anyone with experience using single Ecoda switches:

I have a question for you. If I have 2 sats (2 LNBs) with double output each and I used one output from each with an Ecoda sets at 22Khz On and Off for each sat connected to a 1.0 diseqc switch. Will the Ecoda scans both polarities (H/V) 13/18V?? Thanks!!