hi
HELP
My receiver hang up same as receiver Mr. Bill Pihl's.
I can not connected with RS-232.
Do can anyone recovery with RS-232??????
tanx
Thread: Help
Results 21 to 30 of 33
-
06-22-2013,01:53 PM
-
06-22-2013,02:42 PM
what are the symptoms?? any light on??
X2 Premium III HD, Openbox X5/ S10, Gsky V3/V6, iSmart m100
-
-
06-22-2013,05:39 PM
Have you try using the analog connectors Yellow/ White and Red to see if there is video there?? maybe the HDMI was dissabled???
X2 Premium III HD, Openbox X5/ S10, Gsky V3/V6, iSmart m100
-
-
-
-
-
06-23-2013,08:23 AM
Yes , you can connect using a Null Cable and your computer using your Com Port using RS232. Yes, you can recover your box using this procedure. Make sure the file you try to load for the recovery is : 326sz_v33_1024.r1689.flash.gz.gro.stp. It wont accept regular *.ssu files
Unplug your box from power source
1- Open loader
2- Open File
3- look for the file
4- Hit START
Plug the power back
Wait until finish, box will re-boot by itselfX2 Premium III HD, Openbox X5/ S10, Gsky V3/V6, iSmart m100
-
06-23-2013,06:09 PM
That is not the same problem that i had, I might be wrong but that almost sounds like you are not getting any feed from your LNB or a software glitch, The guys here really know what they are talking about so follow their advice and you will be up and running in no time.