Way to go!
Results 31 to 36 of 36
-
04-16-2013,06:22 PMPortable Comtech 13', Winegard 10', SAMI 7.5', 3 39" Ku dishes one motorized. Scanning 30w-131w
-
04-16-2013,06:31 PMX2 Premium III HD, Openbox X5/ S10, Gsky V3/V6, iSmart m100
-
04-17-2013,06:50 PM
I thought maybe I could beat the reversed motor movement thing by inputing my latitude as Southern hemisphere, but no dice on that either. Heck, I'm starting to think about opening the motor and reverse the motor's power leads.
-
04-17-2013,07:06 PM
what make and model of motor do you have?
Portable Comtech 13', Winegard 10', SAMI 7.5', 3 39" Ku dishes one motorized. Scanning 30w-131w
-
04-18-2013,09:30 AM
I have the SG2100. It works as expected when hooked to my spare Geosat dsr200 receiver.
-
07-09-2013,05:31 PM
Just thought I should follow up. I finally got the reverse motor issue resolved. I reset the X2, but more importantly, the motor too. Reinput all the data into the X2, and its working as it should. So anyone with this issue, if you are using a motor previously used with another box, make sure you do a reset on the motor itself.