Request /features that may be added if possible or report any bugs/issues HERE

[ghan]

You're a good friend

Receiver does not come up to me in Hong loader image I could not even help me

[yosssi]

the problem that report last days is back with the channel saved from other day the receiver crash also when put the channel of the problem.

[ghan]

the problem that report last days is back with the channel saved from other day the receiver crash also when put the channel of the problem.

Hi
I do not speak English regiment has Decoder above I do not know help me Thanks a rs232 cable

[ghan]

uhub0
uhub0: 1 port with 1 removable, self powered
irq_num = 36 controller added
irq_num = 36 skipped
os_notify: Host bus 80b2d804 going into suspend
Insufficient buffer,L=453!
wid=0x500, hight=0x2d0
Insufficient buffer,L=453!
wid=0x500, hight=0x2d0

[AVCTRL] vid start AR : 16_9
[AVCTRL] _AvctrlEvtVdecCallback frame rate --NTSC60--
[_AvctrlVdecStoreFrameInfoProc] DecodeOnlyMode, First Frame was decoded
[DDC_DATA] getDemuxNo erru8DecoderNo =1 *pu8DemuxNo=255
[DDC_DEC] mid_ddc_EvtDecodeCallback err line[1793]
[AVCTRL] _AvctrlEv
[AVCTRL] _AvctrlEvtVdecCallback sent vid stop to mid
[DDC_DATA] getDemuxNo erru8DecoderNo =1 *pu8DemuxNo=255
[DDC_DEC] mid_ddc_EvtDecodeCallback err line[1793]tVdecCallback sent vid dec ok
to midInsufficient buffer,L=453!
wid=0x500, hight=0x2d0
Insufficient buffer,L=453!
wid=0x500, hight=0x2d0

[AVCTRL] vid start AR : 16_9
[AVCTRL] _AvctrlEvtVdecCallback frame rate --NTSC60--
[_AvctrlVdecStoreFrameInfoProc] DecodeOnlyMode, First Frame was decoded
[DDC_DATA] getDemuxNo erru8DecoderNo =1 *pu8DemuxNo=255
[DDC_DEC] mid_ddc_EvtDecodeCallback err line[1793]
[AVCTRL] _A
[AVCTRL] _AvctrlEvtVdecCallback sent vid stop to mid
[DDC_DATA] getDemuxNo erru8DecoderNo =1 *pu8DemuxNo=255
[DDC_DEC] mid_ddc_EvtDecodeCallback err line[1793]vctrlEvtVdecCallback sent vid
dec ok to mid320 NOT Support this fucntion : LAYER_DISP_SetBorder
>>>>>>>>>>>>>>LAYER_DISP_SetVideoWindow0)
InHs:0, InVs:0, InHw:720, InVw:480
OutHs:120, OutVs:44, OutHw:720, OutVw:480
SrcW:720, SrcH:480, WindowWidth:0


LAYER_DISP_DisplayCtrl, 0, 0

[AVCTRL]
[8559]AVCTRL_AutoAdjustAudRAWMode TO MODE[3] RAW[2]/PCM[3]SetSpeed fail, STC is
invalid

[AVCTRL] _AvctrlEvtAdecCallback sent aud stop to mid
[AVCTRL] _AvctrlEvtVdecCallback sent vid stop to mid
Receive Stop command and Notify,command[0]

[AVCTRL] _AvctrlEvtAdecCallback sent aud stop to mid
Receive Stop command and Notify,command[0]
320 NOT Support this fucntion : LAYER_DISP_SetBorder
>>>>>>>>>>>>>>LAYER_DISP_SetVideoWindow1)
InHs:0, InVs:0, InHw:720, InVw:480
OutHs:120, OutVs:44, OutHw:720, OutVw:480
SrcW:720, SrcH:480, WindowWidth:0


LAYER_DISP_DisplayCtrl, 1, 0

[DDC_DEC] mid_ddc_SetAudioType err
[DDC_DEC] mid_ddc_StartAudioDecoding err
[AVCTRL] _AvctrlEvtVdecCallback sent vid stop to mid PowerOn = 0
IGM_HardwareInit
IGM_InitialiseTimers
Get DP Handle = 54440000
stDescPidOpen.u32DpHandle = 54440000
Get DP Handle = 54440000
stDescPidOpen.u32DpHandle = 54440000
Get DP Handle = 54440000
stDescPidOpen.u32DpHandle = 54440000
Get DP Handle = 54440000
stDescPidOpen.u32DpHandle = 54440000
Cannot engage Mobile font: ArInitFont () failed



error code (see bi_lib.h BI_ERROR_xxx): -51



+++++++++stCfgProxySetting.u8Enable = 1


normal get defacode=
.....


Actcoude
, MAC 06-0E-39-42lt cfg=255
###enter n-28-C2
[MMI] vid supportnit OK.....
[MMI] vid support param:mode if:0 ###ecType[rtService][532]###Netif0x10]
[MMI] vid support eneth):dhcp:1 ###port enDecType[0xce][536]###Netif param(d]
37]###Netif param(eth):[MMI] vid support enDecip:192.168.001.100 ###
[M]:_NET$$$$$$$$$$$$$$$$$$$$MI] vid support enDecTy$$$$$$$$$$$$!in dev(0)0x10]
[mid_net_if_ctrl:261]:r send request(4)!! pe[0x1]
[MMI] vType[0x2]
Create Instant Did support enDecType[0xelay Queue OK
[MMI] vid support enDecType[0x7] support enDecType[0x5]===
[AVCTRL] ecRet / DEC-RawStatus/ User-HDMI [0x2/0x0/0x3]
[AVCTRL] Sink AC3 [0] EAC3 [0]
[AVCTRL] The Sel-Path (bitwise) : < STATUS_NONE [0x0] STATUS_TRANSCODE[0x1] BY
PASS_HBR[0x2] BYPASS_DAC1[0x4] >
[AVCTRL] The DEC-RawStatus : (bitwise or)

[ghan]

You can not upgrade my receiver was broken friend with cable 232

[r10fret]

using the media player function when playing back verified good files the audio seems to get ahead 3 seconds of the video within 1-2 minutes of starting the file.

[Gary Bidwell]

I use it all the time and most all the time it works good. I have in the past seen it happen on one channel but do not remember which one.

[vicpro26]

X2 needs to check the Firmware in order to make it work with Newcamd servers using DES key other that 0102030405060708091011121314.
My service provider uses a different DES key and while the box says connected I get Scrambled Service all the time!

Just pass my request to the technical people!

[Costactc]

X2 needs to check the Firmware in order to make it work with Newcamd servers using DES key other that 0102030405060708091011121314.
My service provider uses a different DES key and while the box says connected I get Scrambled Service all the time!

Just pass my request to the technical people!

You are referring to the use of x2 receiver for hack. We only discuss true fta on our site and any other posts about iks will not be tolerated.

[vicpro26]

I am just asking for a new feature to be added, if it is possible, to a current functionality that the makers already included in their product.
I have not mentioned any hack.
Anyway your profile says that you are a SAT Junkie not a moderator.
I will not tolerate your tone!