Request /features that may be added if possible or report any bugs/issues HERE

[yosssi]

Yes. In europe ku band.

[Costactc]

Yes. In europe ku band.

Just wanted to confirm, thanks for the info.

[tabriz]

Tabriz...

Try this... Backup your current database to a usb stick so you do not lose your sat settings. Reset the receiver to default factory settings. Turn off a/c power completely. Reboot and do blind scan on only one sat. If working ok, shut a/c power off to receiver again. Reboot. It should boot up pretty quickly and not the way you describe in your post. If everything working ok with one sat, reload your saved database from usb stick.

If it goes back to old problems after loading database, you may have a corrupt db. If so, you should reset everything and start all over to create a new database.

Dear Friend
You just do not understand my problem
I turn off the receiver after being in standby mode
Turn the power button on the remote control
The receiver comes quickly without booting up
Most of other brands such as receivers come up

[eastof111]

"Unfortunately, turning off the receiver gets the boot time is spent"

No, I guess I don't understand the problem.

[tabriz]

"Unfortunately, turning off the receiver gets the boot time is spent"

No, I guess I don't understand the problem.

What I mean is that after turning off with remote control
And the receiver is in standby mode
Switch on again by remote control
Immediately after standby mode without booting ... Receiver is turned on

[Costactc]

Both my x2 receivers boot up by themselves but I can't see where this would cause any issues.

[yosssi]

Just wanted to confirm, thanks for the info.

Looks like the feed change some data and now working and finish the scan without problem. if happens again would tell it. thanks.

[Only registered and activated users can see links. ]

[dr.zin]

Dear Friend
You just do not understand my problem
I turn off the receiver after being in standby mode
Turn the power button on the remote control
The receiver comes quickly without booting up
Most of other brands such as receivers come up

I could be wrong but I think there was 1 firmware version in 2012 that did that

[tabriz]

I could be wrong but I think there was 1 firmware version in 2012 that did that

If possible, the new software can solve this problem
Thank you

[dr.zin]

i think all nt78326 based receivers boot that way(full boot)