I have a question for club members....and I know this is off topic, but i figured the members of this subforum would be very knowledgeable and tell me the correct answers.
I have had a NfusionHD and it has the same processor as many of the fortis models:

MICROPROCESSOR & MEMORIES
* Main Processor : STI 7101
* CPU Clock : 266Mhz
* Flash Memory : 4 Mbyte + 1Gbyte (Nand flash memory) default
(16Gbyte nand flash memory : Optional)
* DDR SDRAM : 192 Mbyte
* EEPROM : 32 Kbit(Optional)

The nfusion is a good receiver but has had no software support for ages. I use it only for legit fta use...but that is limited due to qpsk tuner only. My question is could the bootloader 6.26 be loaded on it to try e2 on it form a usb stick? As of now the reciever is limited and losing it would not be a huge loss. If i can get e2 to load Imay be able to use my prof 7500 as another tuner for it and it pick up s2 signals. The boxhas a great picture and I like to experiment any way. bricking the box would not ruin my day. I appreciate all of your inputs and sorry for putting something non raptor here...and I thank you for your time and thoughts.

ENERAL FEATURES
* Free To Air Channel Reception Only from Satellite and Terrestrial broadcasting
* IPPVR (Audio & Video recording to remote PC via LAN)
* Dual Inputs (Satellite & Terrestrial) :
-Fully Complies with ATSC HDTV (VSB) & DVB-S MPEG 2
-ATSC Tuner (LG NIM Type) & QPSK Tuner (LG NIM Type)
-Decodes All ATSC HDTV Standard Video Formats
Including 480i / 480p / 720p / 1080i
-Selectable Output Video Format : 1080i / 720p / 480p / 480i
-Standard Definition/High Definition contents
(MPEG2 and support MPEG4 AVC/H.264)
* 2 x USB 2.0, PVR Function Supported : Record & Play with an external HDD
* High Definition Video Output : HDMI and Component (Y/Pb/Pr)
* Audio Decoding : ISO/IEC13818-3(MPEG-2 audio/MUSICAM) Dolby AC-3
* Full compliant of MPEG-S Digital & DVB broadcasting
* 950-2150 MHz Input Frequency (IF Loop Throughout)
* Satellite Scan