Page 1 of 3 123 LastLast
Results 1 to 10 of 21
  1. Collapse Details
    Anyone Have a AZ miniMe Figured Out Yet?
    #1
    Join Date
    Jul 2011
    Location
    Traverse City, Michigan
    Posts
    512
    Post Thanks / Like
    Contribute If you enjoy reading the
    content here, click the below
    image to support our site.
    Click Here To Contribute To Our Site
    Ok, here I go again. I took delivery on a miniMe two weeks ago. After reading how poor the blind scan is, I was discouraged to even take it out of the box. Well today I did and have been screwing around with it for 3 hours and haven't seen one channel yet. Hmmnn.. the setup is difficult on this box and I'm sure I have several settings wrong.

    Here are some screen shots of the setup menus.







    Last edited by Pixl; 12-15-2012 at 02:46 PM.
    Reply With Quote
     

  2. Collapse Details
    #2
    Join Date
    Feb 2012
    Posts
    7,247
    Post Thanks / Like
    Any pictures yet?
    Reply With Quote
     

  3. Collapse Details
    #3
    Join Date
    Jul 2011
    Location
    Traverse City, Michigan
    Posts
    512
    Post Thanks / Like
    Quote Originally Posted by eastof111 View Post
    Any pictures yet?
    I edited them into my first post at the same time you were posting
    Reply With Quote
     

  4. Collapse Details
    #4
    Join Date
    Feb 2012
    Posts
    7,247
    Post Thanks / Like
    Really nice graphics. The tuner setup looks a lot like the Engima2 setup.
    Reply With Quote
     

  5. Collapse Details
    #5
    Join Date
    Jul 2011
    Location
    Traverse City, Michigan
    Posts
    512
    Post Thanks / Like
    Here are some N.A. setup instructions that might explain some stuff.

    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]
    Reply With Quote
     

  6. Collapse Details
    #6
    Join Date
    Feb 2012
    Posts
    7,247
    Post Thanks / Like
    Thanks for the pdfs. The LNB switch offset info helped me. I was having some problems using E2 where they call it switch threshold instead of offset..
    Reply With Quote
     

  7. Collapse Details
    #7
    Join Date
    Sep 2012
    Posts
    19
    Post Thanks / Like
    i didnt see the bandstacked settings in there yet, i hear they are coming. But, with all those user programmable lnb settins, is it possible to use it with bandstacked also?
    thanks
    Reply With Quote
     

  8. Collapse Details
    #8
    Join Date
    Dec 2010
    Location
    Atlanta, Ga.
    Posts
    8,188
    Post Thanks / Like
    It would be better if they had some dedicated settings for bandstacked lnbs, but I have similar settings on a couple of receivers. Adjustable low and high settings for the lnb have allowed me to run a cband bandstacked Eagle Aspen, but I still had some problems with duplicate transponders & channels.
    I wish there was more support for bandstacked equipment because IMO, it is much better technology than the legacy stuff. At least with receivers like these, we can get by with bandstacked lnbs. EB
    .
    .
    .
    Meine Dreambox One ist ein Stück Scheiße!.
    Reply With Quote
     

  9. Collapse Details
    #9
    Join Date
    Jul 2011
    Location
    Traverse City, Michigan
    Posts
    512
    Post Thanks / Like
    The MicroHD is is probably the best receiver for band stacked setup.
    Reply With Quote
     

  10. Collapse Details
    #10
    Join Date
    Sep 2012
    Posts
    19
    Post Thanks / Like
    I am not happy with the micro's failure to keep 18 volts on both V and H Bandstacked settings. as of 12/16/12 cause someday i hope that can be fixed.

    My openbox s9 does a far better job with c-band stacked .

    I expand the scan settings,(micro) but in my opinion , that levels the playing field with all the rest that can do that.
    This creates a tremendous problem. It is difficult to troubleshoot a problem when trying to operate within the confines of a known problem that can influence all the rest of the problems.
    for this reason, i have been studying the new boxes and asking a lot of seemingly dopy questions on them.
    My apologies for that.
    I have my eye on that new AZbox. We will see what happens as pwsurge(?) said he was going to work on the bandstacked issue.
    Reply With Quote
     

Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •