Anyone Have a AZ miniMe Figured Out Yet?

[Pixl]

Ok, here I go again. I took delivery on a miniMe two weeks ago. After reading how poor the blind scan is, I was discouraged to even take it out of the box. Well today I did and have been screwing around with it for 3 hours and haven't seen one channel yet. Hmmnn.. the setup is difficult on this box and I'm sure I have several settings wrong.

Here are some screen shots of the setup menus.

[eastof111]

Any pictures yet?

[Pixl]

Any pictures yet?

I edited them into my first post at the same time you were posting

[eastof111]

Really nice graphics. The tuner setup looks a lot like the Engima2 setup.

[Pixl]

Here are some N.A. setup instructions that might explain some stuff.

[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]

[eastof111]

Thanks for the pdfs. The LNB switch offset info helped me. I was having some problems using E2 where they call it switch threshold instead of offset..

[kodaz]

i didnt see the bandstacked settings in there yet, i hear they are coming. But, with all those user programmable lnb settins, is it possible to use it with bandstacked also?
thanks

[el bandido]

It would be better if they had some dedicated settings for bandstacked lnbs, but I have similar settings on a couple of receivers. Adjustable low and high settings for the lnb have allowed me to run a cband bandstacked Eagle Aspen, but I still had some problems with duplicate transponders & channels.
I wish there was more support for bandstacked equipment because IMO, it is much better technology than the legacy stuff. At least with receivers like these, we can get by with bandstacked lnbs. EB

[pwrsurge]

It would be better if they had some dedicated settings for bandstacked lnbs, but I have similar settings on a couple of receivers. Adjustable low and high settings for the lnb have allowed me to run a cband bandstacked Eagle Aspen, but I still had some problems with duplicate transponders & channels.
I wish there was more support for bandstacked equipment because IMO, it is much better technology than the legacy stuff. At least with receivers like these, we can get by with bandstacked lnbs. EB

We are working on adding support for bandstacked LNBF's in a future firmware update.


Best regards,

PwrSurge
AzBox Canada

[Pixl]

The MicroHD is is probably the best receiver for band stacked setup.