107w 3748 V 6774 two channels in the mux, scan as $ but are ITC. However, one is ok, v32 a33, but the other v16 a17 locks up the Raptor, sound only, and no navigation after this requiring a hard re-boot. Can someone else with a Raptor, or any receiver try this?
Thread: Raptor Locks Up on AMI TV
Results 1 to 10 of 18
-
Raptor Locks Up on AMI TV – 12-09-2012,06:56 PM
-
12-09-2012,08:05 PM
I do not have any c band due to moving the dish, but will check this when I have c band going again. EB
.
.
.
Meine Dreambox One ist ein Stück Scheiße!.
-
12-09-2012,10:24 PM
"107w 3748 V 6774 two channels in the mux, scan as $ but are ITC. However, one is ok, v32 a33, but the other v16 a17 locks up the Raptor, sound only, and no navigation after this requiring a hard re-boot. Can someone else with a Raptor, or any receiver try this? "
Pixl, on the v32 a33, I get v32 a34 and on the v16 a17, I get v16 a18. Both coming in fine with no lock ups. Both show up as SVC_1 Service and SVC_2 Service. Using 2.11.07 Openbox again.Last edited by eastof111; 12-09-2012 at 11:53 PM.
-
12-10-2012,11:02 AM
East, that is interesting. I'll try to key in your slightly different pids tonight and see what happens.
-
12-10-2012,01:09 PM11 ft solid fiberglass BUD and 24' Von Weise Actuator, ESX242 dual C-band lnbf, 10 ft Channel Master TVRO Solid BUD and 24" Thompson-Saganaw Actuator, ESX242 dual C-band lnbf, 8 ft mesh BUD, ESX242 dual C-band lnbf, (2) 36 inch Geosat Pro KU Dishes, both have SG6000 motors, Invacom QPH-031, JSC322-2 dual KU lnb, DSR922 Motorola 4Dtv, Amiko Alien2, (2) Optibox Raptors, Eyebox X5, Pansat 9500 HDX, (2) Openbox S9 fta receivers, Manhattan-1933, & Geosat Pro HDVR 3500 22inch directtv slimline (will be using as a stationary dish). 52 inch LG Plasma, 47 inch LG 3D, Smart TV, 32 inch Coby LCD televisions. LOS 55.0W to 139.0W
-
12-10-2012,07:29 PM
East I keyed in your pids and both channels work now, no lock up. As a verification test, I tried blind scanning the TPs back in, they reverted to my first set of pids and locked up the Raptor again.
Mengram, I also scanned in your 105w TP, confirmed it too locks up the Raptor. I have no manual pid remedy for this one. One common to the two services is they both scan in as $ but are ITC.
-
12-10-2012,07:59 PM
I wonder if it's the firmware? Like I said earlier, I reverted back to 2.11.07 from 2.11.16 Openbox version and did a blind scan with the ALL options.
-
12-10-2012,08:10 PM
Nevermind, now the Raptor is locking up on the 107w channels again. Hmmnn..
-
12-10-2012,09:40 PM
Sounds like you have a real mystery going on there.... Hope you get it working.
-
12-11-2012,09:16 AM
I am not having any problems with either one of the AMI channels. EB
.
.
.
Meine Dreambox One ist ein Stück Scheiße!.