Raptor Locks Up on AMI TV

[Pixl]

107w 3748 V 6774 two channels in the mux, scan as $ but are ITC. However, one is ok, v32 a33, but the other v16 a17 locks up the Raptor, sound only, and no navigation after this requiring a hard re-boot. Can someone else with a Raptor, or any receiver try this?

[el bandido]

I do not have any c band due to moving the dish, but will check this when I have c band going again. EB

[eastof111]

"107w 3748 V 6774 two channels in the mux, scan as $ but are ITC. However, one is ok, v32 a33, but the other v16 a17 locks up the Raptor, sound only, and no navigation after this requiring a hard re-boot. Can someone else with a Raptor, or any receiver try this? "

Pixl, on the v32 a33, I get v32 a34 and on the v16 a17, I get v16 a18. Both coming in fine with no lock ups. Both show up as SVC_1 Service and SVC_2 Service. Using 2.11.07 Openbox again.

[Pixl]

East, that is interesting. I'll try to key in your slightly different pids tonight and see what happens.

[mengram]

"107w 3748 V 6774 two channels in the mux, scan as $ but are ITC. However, one is ok, v32 a33, but the other v16 a17 locks up the Raptor, sound only, and no navigation after this requiring a hard re-boot. Can someone else with a Raptor, or any receiver try this? "

Pixl, on the v32 a33, I get v32 a34 and on the v16 a17, I get v16 a18. Both coming in fine with no lock ups. Both show up as SVC_1 Service and SVC_2 Service. Using 2.11.07 Openbox again.

My Raptor does the same thing on those channels eastof111. I posted about this issue in an earlier thread. Also have the same problem on the NUVO channel on 105.0W C-band 3920/V/30000.

mengram

[Pixl]

East I keyed in your pids and both channels work now, no lock up. As a verification test, I tried blind scanning the TPs back in, they reverted to my first set of pids and locked up the Raptor again.

Mengram, I also scanned in your 105w TP, confirmed it too locks up the Raptor. I have no manual pid remedy for this one. One common to the two services is they both scan in as $ but are ITC.

[eastof111]

I wonder if it's the firmware? Like I said earlier, I reverted back to 2.11.07 from 2.11.16 Openbox version and did a blind scan with the ALL options.

[Pixl]

Nevermind, now the Raptor is locking up on the 107w channels again. Hmmnn..

[eastof111]

Sounds like you have a real mystery going on there.... Hope you get it working.

[el bandido]

I am not having any problems with either one of the AMI channels. EB