Results 1 to 9 of 9
  1. Collapse Details
    PKT E2 - Nebula V3 USB Image - Discussion
    #1
    Join Date
    Dec 2010
    Location
    Atlanta, Ga.
    Posts
    8,191
    Post Thanks / Like
    Contribute If you enjoy reading the
    content here, click the below
    image to support our site.
    Click Here To Contribute To Our Site
    Discuss this Topic here.
    Reply With Quote
     

  2. Collapse Details
    #2
    Join Date
    May 2012
    Posts
    258
    Post Thanks / Like
    Can it display in 60 hz? Mine can't on Anaconda. If you scan 101 West Cband do you get audio for Lorac Stations? Same for 103 W Cband ION East HD And PACIFIC HD? On SES 2 Ku band the LPBS no sound either. When I say no sound....there are no PIDs for sound, and none can be enetered it just erases them.
    other than those this is a great release. Streaming is flawless.
    Those guys do great work.
    Reply With Quote
     

  3. Collapse Details
    #3
    Join Date
    Feb 2012
    Posts
    7,247
    Post Thanks / Like
    The last three versions of PKT that I tried, had problems with audio on some of the channels you mention. Audio worked prior to these releases. Also, if you change the names of the channels, it will erase them if you do a rescan. I have not tried this latest version yet. I am still using HDMU because it doesn't have the audio issues. The rescan problem exists in HDMU also.
    Reply With Quote
     

  4. Collapse Details
    #4
    Join Date
    Dec 2010
    Location
    Atlanta, Ga.
    Posts
    8,191
    Post Thanks / Like
    MEtv and some other stations transmit ac3 or dolby audio. For some reason, PKT does not put this audio on the HDMI cable. Some of the other E2 firmwares do.
    I also have problems with PKT missing channels on c band. Things are not as bad as they used to be but they still have a long way to go in North America.

    To date, the best E2 firmware that I have ran is the OpenPLi for the Golden Media tripleX. This E2 scans great and the audio works. IMO, it would be better than the factory firmware for the TripleX IF the OpenPli had blind scan. EB
    .
    .
    .
    Meine Dreambox One ist ein Stück Scheiße!.
    Reply With Quote
     

  5. Collapse Details
    #5
    Join Date
    May 2012
    Posts
    258
    Post Thanks / Like
    Does openpli make an image that will run on Anaconda or raptor? Did either of you get 60 hz in your options to display for 480, 720, 1080?
    Thanks guys!
    Reply With Quote
     

  6. Collapse Details
    #6
    Join Date
    Dec 2010
    Location
    Atlanta, Ga.
    Posts
    8,191
    Post Thanks / Like
    The 60Hz option is there. Press the up key on the remote when 50Hz is being displayed and the 6oHz option will appear.

    No open PLi for the Optibox yet that I can find.
    .
    .
    .
    Meine Dreambox One ist ein Stück Scheiße!.
    Reply With Quote
     

  7. Collapse Details
    #7
    Join Date
    May 2012
    Posts
    258
    Post Thanks / Like
    Thanks EB , I will try it when I get home. 60 hz wasn't listed as one of the possible modes in the set up, or system settings.
    Reply With Quote
     

  8. Collapse Details
    #8
    Join Date
    Dec 2010
    Location
    Atlanta, Ga.
    Posts
    8,191
    Post Thanks / Like
    60Hz has to be setup at the very beginning when the image is first introduced to the receiver. You cannot go in the menu and select it once the image has been installed.
    .
    .
    .
    Meine Dreambox One ist ein Stück Scheiße!.
    Reply With Quote
     

  9. Collapse Details
    #9
    Join Date
    May 2012
    Posts
    258
    Post Thanks / Like
    Thanks EB, i got the 60hz. Weird...never showed up as an option...then appears. I'll take it though
    Reply With Quote
     

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •