Results 1 to 1 of 1
  1. Collapse Details
    Slingbox Remote Codes From Icecrypt
    #1
    Join Date
    Dec 2010
    Location
    Atlanta, Ga.
    Posts
    8,188
    Post Thanks / Like
    Contribute If you enjoy reading the
    content here, click the below
    image to support our site.
    Click Here To Contribute To Our Site
    These files were originally released at Icecrypt but they should work for the Optibox Anaconda, Raptor and Gekko. EB



    This contains 2 BIN files.

    V2010_PL.bin for USA (NTSC) Slingboxes
    V2010_RV.bin for non-US (PAL) Slingboxes

    Put the files into your C:\Program Files\Sling Media\Slingplayer\SBAV\ folder (For the Mac it is /Applications/SlingPlayer/Contents/Slingbox Setup Assistant/Contents/Resources/SBAV/).

    Now go into Slingplayer and run Setup Assistant and 'Configure Video Sources' (In Slingplayer 1.5 select Edit in the Slingbox Directory then the 'Slingbox Configuration' Tab and the Audio/Video Setup) using Standalone DVR as the device type.

    This time use 'Other' as the brand and in the next screen use scroll to the bottom of the Code numbers, select 'Custom' and then type V2010 (NOT v2010, the code is case-sensitive) in the newly appeared Custom Code window. Then complete the setup as normal (In Slingplayer 1.5, you do not need to scroll down the codes, simply type V2010 in the Alternative Code window).

    If you have problems do NOT just report that it 'doesn't work', that is totally useless for someone trying to understand what is going on. So report the following:

    1. Was there any error message after you typed in the Code (and Tapped the Power button in V2.0) ?

    2. Did you give the Power command plenty of time to react ? (I have a DVR that takes about 6-8 seconds to power up/down)

    3. After completing the setup (regardless of whether the Power button worked) do any of the other buttons work ?

    4. Have you used a Digital Camera to confirm the IR Blaster is actually firing when you tap the Power button ?

    5. Have you experimented with the placement of the IR Blaster ?

    I have mapped the logical keys. Extra functions have been mapped to the Custom Menu on the remote (Tap the Menu button at the top of the remote and select Custom) as follows:

    Custom 10: Favourite
    Custom 11: TV/Radio
    Custom 12: SubTitle
    Custom 13: Teletext
    Custom 14: Resolution
    Custom 15: Sleep
    Custom 16: V-Format

    And to answer the obvious question, you can NOT rename the Custom menu options to their function, SlingMedia do not allow that. The best thing to do is use Slingplayer V1.5, which allows you to add them as Custom Buttons, with icons, at the bottom of the screen.

    And note you cannot change the remote 'skin'. Slingmedia also do not allow changing that so you are stuck with their generic design.

    If you wish to modify the remote I have also included the .rmdu source file for the RemoteMaster program.

    For instructions, see:

    [Only registered and activated users can see links. ]
    Attached Files Attached Files
    .
    .
    .
    Meine Dreambox One ist ein Stück Scheiße!.
     

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •