I need to know if anyone is having trouble with the AMI/TAC channels on 107.3W C-band, TP 3749/V/6774. Channel 1 of that 2 channel mux causes my Raptor to lock/freeze up if the picture does not come on instantly. I don't have any problem with channel 2 of the mux, just channel 1.
I also noticed the NUVO channel on 105.0W C-band on TP 3920/V/30000 does the same thing. No problem with Bounce, Pursuit, or Blue Hiways TV when it was itc, just the NUVO channel. I really hate having to kill the power using the rocker switch because it takes so long to reboot and I have to reset the time each time I have to reboot using that method.
Thanks for looking, any help with this issue will be greatly appreciated.
mengram
Results 1 to 10 of 18
-
Problem with the Raptor and 107.3W Anik F1 F1R-C – 05-18-2012,05:58 PM11 ft solid fiberglass BUD and 24' Von Weise Actuator, ESX242 dual C-band lnbf, 10 ft Channel Master TVRO Solid BUD and 24" Thompson-Saganaw Actuator, ESX242 dual C-band lnbf, 8 ft mesh BUD, ESX242 dual C-band lnbf, (2) 36 inch Geosat Pro KU Dishes, both have SG6000 motors, Invacom QPH-031, JSC322-2 dual KU lnb, DSR922 Motorola 4Dtv, Amiko Alien2, (2) Optibox Raptors, Eyebox X5, Pansat 9500 HDX, (2) Openbox S9 fta receivers, Manhattan-1933, & Geosat Pro HDVR 3500 22inch directtv slimline (will be using as a stationary dish). 52 inch LG Plasma, 47 inch LG 3D, Smart TV, 32 inch Coby LCD televisions. LOS 55.0W to 139.0W
-
05-18-2012,08:17 PM
I cannot get these channels on my 7.5 ft dish to make any comment about them. EB
.
.
.
Meine Dreambox One ist ein Stück Scheiße!.
-
05-18-2012,11:08 PM
Just did a blind scan of 107 and it scanned nothing on 3749. Then did a manual scan of 3749 selecting all channels and both stations scanned in. L 91 and Q71.
No problems with SVC_1_Channel (AMI) causing a reboot. Switched to eScapes on 99C (no signal - just to test) then switched back to Channel 1 AMI, took a few seconds this time for signal to pop in. No reboot necessary.
Will try out 105 tomorrow.
-
05-19-2012,04:57 PM
Started blind scan on 105 C.
Added 105 C to Sat list and 3760 V 28068 Nasa prior to blind scans.
L = 94 Q = 76.
1 - Blind scan FTA only. Finds transponders but stays on channel search of 4160 V 30000 for five minutes, so I cancelled the blind scan.
2 - Blind scan All Channels. Same as above.
3 - Blind scan TV only. Same as above.
4 - Auto scan Fta only. Found three channels within 2 seconds (NASA).
5 - Auto scan All channels only. Same as 4.
6 - Auto scan TV only. Same as 4.
7 - Manual scan of 3760 Fta only. Same as 4.
8 - Manual scan of 3760 All channels. Same as 4.
9 - Manual scan of 3760 TV only. Same as 4.
10 - Blind scan manual 3700 to 4200 Fta only. Finds transponders but stays on channel search of 4160 V 30000 for five minutes, so I cancelled the blind scan.
11 - Blind scan manual 3700 to 4200 All channels. Same as 10.
12 - Blind scan manual 3700 to 4200 TV only. Same as 10.
13 - Blind scan manual 3760 to 3780 Fta only. Finds transponders and 4 channels within 20 seconds.
14 - Blind scan manual 3760 to 3780 All channels. Same as 13.
15 - Blind scan manual 3760 to 3780 TV only. Same as 13.
16 - Blind scan manual 3920 to 3940 Fta only. Finds transponders and 6 channels within 20 seconds.
16 - Blind scan manual 3920 to 3940 All channels. Same as 16.
17 - Blind scan manual 3920 to 3940 TV only. Same as 16.
18 - Had to add 3920 V 30000 was not blind scanned in. L=93 Q=80.
19 - Auto scan Fta only. Gets stuck on channel search of 3920. Cancelled auto scan.
20 - Auto scan All channels only. Same as 19.
21 - Auto scan TV only. Same as 19.
22 - Manual scan of 3920 Fta only. Same as 19.
23 - Manual scan of 3920 All channels only. Same as 19.
24 - Advanced scan of 3920 V 30000 - 33-34-33-DVBS2-5/6-8PSK-On. Found SVC_2_Channel within 2 seconds. Displays "Channel Error".
25 - Rebooted - Same channel error.
26 - Advanced scan of 3920 V 30000 - 49-50-49-DVBS2-5/6-8PSK-On. Found SVC_3_Channel within 2 seconds. Displays "Channel Error".
27 - Advanced scan of 3920 V 30000 - 65-66-65-DVBS2-5/6-8PSK-On. Found SVC_4_Channel within 2 seconds. Displays "Channel Error".
28 - Advanced scan of 3920 V 30000 - 81-82-81-DVBS2-5/6-8PSK-On. Found SVC_5_Channel within 2 seconds. Displays "Channel Error".
29 - Advanced scan of 3920 V 30000 - 97-98-97-DVBS2-5/6-8PSK-On. Found SVC_6_Channel within 2 seconds. Displays "Channel Error".
30 - Advanced scan of 3920 V 30000 - 113-114-113-DVBS2-5/6-8PSK-On. Found SVC_7_Channel within 2 seconds. Displays "Channel Error".
31 - Advanced scan of 3920 V 30000 - 24-25-24-DVBS2-5/6-8PSK-On. Found SVC_10_Channel within 2 seconds. Displays "Channel Error".
32 - Advanced scan of 3920 V 30000 - 193-194-193-DVBS2-5/6-8PSK-On. Found SVC_10_Channel within 2 seconds. CHANNEL DISPLAYS OK. Bounce TV.
I copied the PIDS from Lyngsat. Could be why some of the channels show as error.
I don't have anything for NUVO or Blue Hiways. If someone can post the correct PIDS I will try to scan them in.
-
05-19-2012,05:08 PM
Thank you east..for all the typing and scanning there bro, great job...much appreciated...
click click b00m
-
05-19-2012,05:15 PM
That is interesting and I appreciate the details.
My Raptor does not hang up on 105 C band. I blind scan 8 transponders on this satellite and it does not hang up on any of them. 4160V Is one of the transponders that I get in a blind scan. EB.
.
.
Meine Dreambox One ist ein Stück Scheiße!.
-
05-19-2012,05:25 PM
Edit my earlier post.
33 - Advanced scan of 3920 V 30000 - 20-21-20-DVBS2-5/6-8PSK-On. Found SVC_9_Channel within 2 seconds. CHANNEL DISPLAYS OK. NUVO TV.
No re-boot necessary.
Certainly hope they resolve these scan problems soon.
-
05-19-2012,06:59 PM
After playing around with 105c, my receiver finally locked up when switching to NUVO and I had to hard boot the receiver.
-
05-19-2012,08:26 PM
Thanks for confirming the issue with the Nuvo channel eastof111. I bumped up the frequency and SR numbers on the AMI channel on 107.3W and have not had the receiver lock up in the last couple times I changed to that channel. I will keep checking and post any results.
mengram11 ft solid fiberglass BUD and 24' Von Weise Actuator, ESX242 dual C-band lnbf, 10 ft Channel Master TVRO Solid BUD and 24" Thompson-Saganaw Actuator, ESX242 dual C-band lnbf, 8 ft mesh BUD, ESX242 dual C-band lnbf, (2) 36 inch Geosat Pro KU Dishes, both have SG6000 motors, Invacom QPH-031, JSC322-2 dual KU lnb, DSR922 Motorola 4Dtv, Amiko Alien2, (2) Optibox Raptors, Eyebox X5, Pansat 9500 HDX, (2) Openbox S9 fta receivers, Manhattan-1933, & Geosat Pro HDVR 3500 22inch directtv slimline (will be using as a stationary dish). 52 inch LG Plasma, 47 inch LG 3D, Smart TV, 32 inch Coby LCD televisions. LOS 55.0W to 139.0W
-
05-19-2012,09:03 PM
What sat file are you folks using? Are you using sat file that came with the firmware or a different one?
.
.
.
Meine Dreambox One ist ein Stück Scheiße!.