Sorry for this stupid question! Is there a particular firmware update (old or otherwise) that deals with the X2 Premium HD receiver and the Manual CLOCK set keeping a better time? My X2 loses about 60 seconds a day! Thanks
Printable View
Sorry for this stupid question! Is there a particular firmware update (old or otherwise) that deals with the X2 Premium HD receiver and the Manual CLOCK set keeping a better time? My X2 loses about 60 seconds a day! Thanks
If using recent firmwares, You will need to have you box connected to internet either by ethernet or wi-fi to keep an almost accurate clock.
Thanks for the reply carlospr43! Not sure the Cat5 or Wifi will work, due to location of my receiver? The receiver is way back in a corner but I am going to look into that and see what I can do!
One more question! The newer X2 models, do they work pretty good with the wifi setup? May have to update my receiver! Thanks for your help
X2 premium III works great either with Ethernet cable or Wifi. Wifi is internal you just plug the supplied antenna in the rear. X2 premium IV is supposed to be better similar to the III but with a better chip and more memory.
nopeQuote:
Originally Posted by terrer [Only registered and activated users can see links. Click Here To Register...]
and I have tried every version since aug 15 2012
I don't use a network connection so I am sol
Ok! Thanks carlospr43! I am going to invest in the upgrade! Thanks for the informationQuote:
Originally Posted by carlospr43 [Only registered and activated users can see links. Click Here To Register...]
One more stupid question, which is probably in wrong forum! When you format your USB stick, how do you know which format to use and what allocate size? NTFS--FAT-FAT32..........I sometime get an error message "speed to slow"....Sorry if I posted in wrong place! If you know of a good read, would love to see this information! Thanks for your help
Nope???....I assume this problem may be a hardware issue? ...Thanks for the informationQuote:
Originally Posted by dr.zin [Only registered and activated users can see links. Click Here To Register...]
FAT32Quote:
Originally Posted by terrer [Only registered and activated users can see links. Click Here To Register...]
speed too slow is an interface problem to the hardrive.
Sounds funny but go with a usb3.0 external case and problem solved.
I spent hundreds on hardrives/usb2.0 cases before I figured that one out.
Fat 32! Thanks carlospr43 for all your help! I guess I am good to go now! Thanks much