Solve the FTP Upgrade also improve the IPTV and Wifi.
File >>> [Only registered and activated users can see links. Click Here To Register...]
Discuss this Topic here.
Printable View
Solve the FTP Upgrade also improve the IPTV and Wifi.
File >>> [Only registered and activated users can see links. Click Here To Register...]
Discuss this Topic here.
Previous database loaded fine into this new release.
Thanks carlos..
IPTV comes with 62 urls pre-assigned in firmware (my iptv) mostly Russian. Items cannot be deleted. Upgrading from usb stick will randomly select one url from stick and updates (my iptv) to 63 urls in memory. In other words, cannot delete my iptv urls to load usb stick urls.
Is there any chance the "30 second skip" for recorded programs made it into this version?
I don't believe so Mike, this was a file in the works before the last requests..the 30 second skip feature was sent to the engineers to look at among other things.Quote:
Originally Posted by MikeB [Only registered and activated users can see links. Click Here To Register...]
I'm hoping we see this in the next release.
And east I sent the IPTV issue for them to solve.
Did you use the receiver backup or usb? I just saved my database and flashed the new file...its all gone.Quote:
Originally Posted by carlospr43 [Only registered and activated users can see links. Click Here To Register...]
For me, it froze after flashing, this never happened before. Saved DB to memory, then saved DB to usb just in case, flashed receiver with new firmware, froze. Turned power off and receiver booted ok. Uploaded saved DB from usb and receiver rebooted ok. So far, everything ok.
I use the receiver backup. I restored it after loading the new file and it came back OK. I usually do a factory reset after loading any new fileQuote:
Originally Posted by Costactc [Only registered and activated users can see links. Click Here To Register...]
All gone here on my c band setup, starting over at Express AM 44 at 11w.
For those who doesn't want to loose their database, there are 3 ways to save yours: Receiver database backup/ restore feature inside or internally in your own box , at the setup menu Upgrade and backup, Backup to USB (right arrow to choose Database) using your USB pen drive or use the null cable with the EZM editor and send file from receiver (database) to your PC after connecting both.
Scanning over gives me the chance to see if any new tp or channels are up there on some sats I don't frquent too often. I also have to setup all sats from 11-27.5w as they are not on the sat list.
Recently purchased this fta receiver and have a problem.
The radio channels not working at all, no sound and the channel listings are all scrambled with yyyyyy.
Tried this new firmware and made no difference, also tried the factory reset several times.
I enjoy the way this unit works, its fast, and easy to use, but, need the radio stations.
Any Ideas - Thanks
Welcome to Legit Dave! What satellite in particular are you trying to listen to the radio stations?
Carlos very good job.New release are fine no problems.Good support
I like the support for x2 compare to the az and vantages I have the x2 are the best support.For the price no complains
Sadly, it looks like this January version appears to have broken the EPG that the December version fixed on G-19. Ebru, JN1, RT, etc. no longer have anby EPG information.
Is it just me or my configuration?
thanks in advance,
FMW
Just revert back to the December file.Quote:
Originally Posted by FatManWalking [Only registered and activated users can see links. Click Here To Register...]
I would have never figured that out without your insight, thanks!
I wasn't complaining about it. I was hoping that by reporting it, the powers that be, might pass it up the food chain so that it might get fixed in the next release.
I won't bother to report anything again.
FMW
Quote:
Originally Posted by FatManWalking [Only registered and activated users can see links. Click Here To Register...]
Are you serious?
You tell me. How should I respond to your smug and patronizingly obvious answer?Quote:
Originally Posted by Costactc [Only registered and activated users can see links. Click Here To Register...]
Not everyone with low post counts is an idiot or a newbie, or likes being treated as one.
I've been playing with sat reception for almost thirty years, and computers since I was storing my programming on punch cards. This ain't my first rodeo.
WoD
Hats off to your experience bud but my response was just a quick solution to your problem. Your mistake if you think you're being treated like an idiot, that was not my intention.
Then I'll slowly start removing the needles from the voodoo doll....Quote:
Originally Posted by Costactc [Only registered and activated users can see links. Click Here To Register...]
FMW
Just curious, are you intentionally attempting to get banned?Quote:
Originally Posted by FatManWalking [Only registered and activated users can see links. Click Here To Register...]
To be totally honest with you, if your reply to my earler post today about the EPG is any indication of the caliber of "experienced" users in this forum, and the level of alledged "help" that's considered to be the norm, I really don't see need for me spend time here.Quote:
Originally Posted by Costactc [Only registered and activated users can see links. Click Here To Register...]
If you want to ban me, then quite trying to threaten me, and so it. I have a recessive "ass kissing gene" so you won't suceed at trying to scare me into begging you to let me stay and stroking your ego. I promise to not loose any sleep over it.
FMW
You really are quite amusing. I'd really like to know which site you came from and what the **** you want. I would suggest you go back to where your experience will be appreciated but do stick around if you like as you might be able to enlighten us with your knowledge.Quote:
Originally Posted by FatManWalking [Only registered and activated users can see links. Click Here To Register...]
I found this forum after spending some time with one of the search engines. I didn't come here to stir the pot. At the time I was looking to supplement my old S9 receivers and the new X2 looked like a very reasonably priced candidate.Quote:
Originally Posted by Costactc [Only registered and activated users can see links. Click Here To Register...]
I wanted to read input from owners and their experiences. This forum seemed to be one of the more informative one on the subject and answered my questions. My primary questions were about ongoing firmware development and customer support. From what I read, both seemed positive. As a result, I bought a couple of the receivers.
I'm still here but to keep an ear to the rail for any weird hardware quirks that may exist in the X2 like the S9 had. It's a lot easier to prophylactically replace a polyfuse here, or a voltage regulator there, BEFORE a failure. The software quirks I just have to live with until updated firmware is released.
FMW
There are still some firmware problems to resolve in the X2. But they continue to provide support in correcting problems and adding customer requests to their builds. Unfortunately, as with many receivers, be it a $50 or $600 item, when one problem is fixed another may pop up or an older gremlin may return. This has happened to many of us with many other receivers we have purchased.
The positive point is that they are still providing support and not brushed it aside by issuing a new receiver to the market.
Agreed. Sadly, THAT seems to be a rare thing any more. I like the fact that the I, the II, and the SRT-xxx or whatever the new model is, all use the same firmware. After a while, perfection or something very close, stands a good chance of being achived.Quote:
Originally Posted by eastof111 [Only registered and activated users can see links. Click Here To Register...]
Come to think of it, I never really noticed this prior to the last couple of revisions, if I don't poweroff the receiver after every dozen or so blind searches, it will lockup and require an unplug. I guess that there's a memory managment issue that needs to be resolved.
FMW
surprised support lasted as long as it did.
openbox was only good for about 9 months of support per model.
Perhaps the X2 is not the problem. Did anybody bother to check and see if the EPG is working on other receivers besides the X2?
I checked Ebru using my Duo2 and do not find any EPG info on it except for IMDb. EB
Blank EPG Box
[Only registered and activated users can see links. Click Here To Register...]
IMDb Query
[Only registered and activated users can see links. Click Here To Register...]
IMDb Searc Results
[Only registered and activated users can see links. Click Here To Register...]
Ebru Channel Info
[Only registered and activated users can see links. Click Here To Register...]
Yep, totally forgot about that... Ebru and RT haven't worked for the last few days on mine either.
Quote:
Originally Posted by FatManWalking [Only registered and activated users can see links. Click Here To Register...]
Quote:
Originally Posted by Costactc [Only registered and activated users can see links. Click Here To Register...]
FMW, I think if you would have taken the advice of Costa and went back to the December file, you would have found that the EPG for those channels does not work with that file either.Quote:
Originally Posted by FatManWalking [Only registered and activated users can see links. Click Here To Register...]
I do not run the X2 receiver on a daily basis, nor do I normally view the 97W Ku satellite. I did take the time to check for EPG data on two of the channels you mentioned using two different receivers. To Put it in a simple form, no EPG data seems to exist for these channels right now.
Sometimes the simplest solution is the one that is overlooked and is the one that is ridiculed.
Attached is a picture taken this evening using the X2 with December firmware, tuned to JN1 TV at 97W Ku. EB
[Only registered and activated users can see links. Click Here To Register...]
jan 2013 firmware doesn't show any epg data either,so 1 year old firmware had the same problem if the epg exists at all.
I didn't try other brands of receiver.
No EPG on any of my STBs on G19 97W Ebru TV, Russia Today etc at this moment
Linkbox 8000HD Local
Openbox S10
openbox X5
Skybox F3
X2 premium
The DW-TV channel on 103W 3740V-29270 is another place to test for a working FTA EPG.
Have not upgraded to the January firmware, using the Dec 18 2013, and the date is always changing to different months, days, and years.....But the HOUR or TIME is always on the spot. That is very strange about the Date information.
Is anyone having this anomoly with the December or the new January firmware.
Thanks.
Using the January file, connected via wifi and both the date and time are spot on.
Will give the January file a try. Just hate to loose my settings from the December firmware.
Costactc, do you keep you receiver on all the time?
Thanks.
No, I don't keep it on all the time although it likes to turn itself on quite frequently. Save all your sat and channel info before upgrading.