Sundtek Settopbox Installer

Attached is an.exe file that will install the Sundtek Control Center plugin on most enigma 2 set top boxes. Installation of this plugin is needed for the proper operation of the Sundtek usb devices.

These instructions are specific for the Sundtek ATSC Device.

Your set top box will need to be installed on a working network that is connected to a Windows computer. Verify the network ip of the set top box and verify that it can be accessed with the Windows computer.

1. Download the attachment and unpack in a Windows network computer.
2. Start the unpacked SSI.exe file.
3. A pop-up window will appear once the SSI.exe file is started. Enter the box ip and verify that all 4 boxes are checked in the SSI pop-up window.
4. Select DVB-T in the Autostart Tuner Box.
5.Verify that the login and password are correct for your box, then click on install. The Set top box will reboot once installation is complete.

Here is a screenshot of the completed pop-up window for my ATSC installation.
[Only registered and activated users can see links. Click Here To Register...]

The Sundtek plugin should be found in plugins, and also in the Service Searching Menu.

[Only registered and activated users can see links. Click Here To Register...]

For ATSC Scanning, you will need to download the attached file, unzip it and install it in the receiver at: etc/tuxbox. Reboot the box after installing.

You will have a terrible time scanning with ATSC unless this file or a similar one is installed. EB