2 Attachment(s)
Technomate TM-Twin OE Dvb-S2 Hd
I have been thinking of entering the world of Linux and Enigma as well, keeping my eye on this one:
M-Twin
Twin Tuner HD Satellite Receiver
Highlights
Full HD 1080p & 3D Ready
2x HD Satellite (DVB-S2) Tuners
405MHz Broadcom Dual Core MIPS Processor
Linux Open Embedded
Internal 3.5” Hard Disk Drive Support, 3x USB Ports
1x Smart Card Reader & 2x Common Interface (CI) Slots
Ethernet Port
OverviewFeaturesSpecifications
With Technomate’s flagship twin tuner satellite receiver, the TM-Twin, you can watch satellite channels in glorious High-Definition (HD), Full HD 1080p with Dolby Digital Plus to give you a superior audio experience. It’s also 3D ready*. Not content with standard components, the TM-Twin's components are all high-grade, high-quality to deliver you the best performing satellite receiver.
It is an Open Embedded satellite receiver which has Third Party Software to give you plenty more functions than a standard satellite receiver.
Not leaving the Standard Definition (SD) channels behind, we’ve developed a built-in hardware Upscaler to improve the picture quality of Standard Definition (SD) channels via the HDMI output. What Satellite magazine (July 2011) further said that the 'upscaled SD channels appear solid and lifelike'.
You can use a USB Hard Disk Drive (HDD) or an internal 3.5" Hard Disk Drive to record all your favourite channels, listen to your music and watch a slideshow of your photos.
The luxurious Vacuum Fluorescent Display (VFD) front panel displays: channel names, recording status, playback status...and more (display may vary to the above).
To watch the same channel on another TV, there’s an RF modulator at the rear of the satellite receiver, so you can watch all your channels in your bedroom (requires a cable to be connected from the RF modulator to the second TV).
The silent temperature and speed controlled fan cools the TM-Twin only when needed and the speed level can also be adjusted.
It’s even Eco-friendly with 1W standby power consumption.
For further information about this product, please click on the Features and Specifications tabs.
*not all 3D formats are compatible & requires a 3D TV
Fully MPEG-2, MPEG-4 & H.264 Compliant
DVB-S & DVB-S2 Complaint
2x HD Satellite (DVB-S2) Tuners
405MHz Broadcom Dual Core MIPS Processor
256 Mbyte NAND Flash & 384 Mbyte DDR2 Ram
Linux Open Embedded
Output Resolution: Full HD 1080p, 1080i, 720p, 576p, 576i & 3D Ready*
1x Smart Card Reader & 2x Common Interface (CI) Slots
HDMI & Component YPbPr Outputs
Dolby Digital Plus compliant via optical S/PDIF output
3x USB 2.0 Ports (1x front and 2x rear)
Ethernet Port
Vacuum Fluorescent Display (VFD) to display channel names, status, etc
Temperature & Speed Controlled Fan
Unlimited Channel Memory
2x Scart Outputs with RGB and CVBS support
Super sensitive tuner for very weak signals and weak transponders
Less than 1 second channel change
DiSEqC 1.0, 1.1, 1.2 & 1.3 (USALS) compatible
PLL type RF-Modulator (Ch. 21- 69) and UHF tuning function
Extended EPG and programme reservation on EPG
Support for multiple audio language broadcasts
Supports PAL/NTSC systems
Parental Control
SCPC & MCPC receivable from C/Ku band satellites LNBs supported: Universal, Single, Single S & C band wideband LNBs
4:3 & 16:9 screen formats
Timer & multi-event timer functions
Automatic FEC and PID detection and manual entry of PID values
Loop through tuner
Real time clock
Teletext & Subtitle support by OSD and VBI
LNB short circuit protection onboard
1W Standby power consumption option
System:
Video Decoder:
MPEG-2, MPEG-4 HD, H.264, PAL, NTSC
Audio Decoder:
MPEG-1/2, Dolby Digital Plus AC3 Audio
Tuner:
2x DVB-S2
High-Definition HD:
1080p, 1080i, 720p, 576p, 576i
CPU:
405MHz
SDRAM / Flash:
384Mbytes / 256Mbytes
Front:
Front Display:
Vacuum Fluorescent Display (VFD)
Front USB:
1
Smart Card Reader:
1
Common Interface (CI) Slot:
2
Rear:
Video Interface:
HDMI, Component YPbPr, 1x TV Scart (RGB, CVBS), 1x VCR Scart (CVBS), RCA
Audio Interface:
Optical S/PDIF
Ethernet Interface:
10/100Mbps
Rear USB:
2x USB 2.0
RF Modulator:
CH21-69, PAL-I/G/K/M, NTSC
Internal SATA Support:
O
Fan:
Temperature & Speed Controlled
Power Supply:
Input Voltage:
AC 100~240V, 50/60Hz
Standby Consumption:
Under 1Watt
Others:
Size (WxHxD):
340x65x255 (mm)
I will need to know if it has a blind scan though as it isn't mentioned.
[Only registered and activated users can see links. Click Here To Register...] [Only registered and activated users can see links. Click Here To Register...]
