Quote:
The Extend TM range was specifically designed to address the need to support multi-LNB
installations on a single dish antenna.
The long neck allows greater flexibility in positioning the LNBs next to each other enabling
access to satellites typically too close in their orbital position to be received with standard
neck LNBs. Manufactured to the highest industry quality standards and designed to meet
strict specifications, this LNB is an ideal solution for the satellite broadcast reception across
Europe.
Look at the attached pictures, and you will see where lnb feed support arms have two possible bolt holes for mounting the feed. I tried both of them and ended up using the second bolt hole. Moving the neck of the lnb in and out would change the signal by a noticeable amount when the feed was in the first set of bolt holes. The position of the lnb neck became less important, with the maximum signal being found at the bottom of the lnb neck with the feed set correctly in the second set of bolt holes.