Yes. In europe ku band.
Yes. In europe ku band.
Just wanted to confirm, thanks for the info.Quote:
Originally Posted by yosssi [Only registered and activated users can see links. Click Here To Register...]
Dear FriendQuote:
Originally Posted by eastof111 [Only registered and activated users can see links. Click Here To Register...]
You just do not understand my problem
I turn off the receiver after being in standby mode
Turn the power button on the remote control
The receiver comes quickly without booting up
Most of other brands such as receivers come up
"Unfortunately, turning off the receiver gets the boot time is spent"
No, I guess I don't understand the problem.
What I mean is that after turning off with remote controlQuote:
Originally Posted by eastof111 [Only registered and activated users can see links. Click Here To Register...]
And the receiver is in standby mode
Switch on again by remote control
Immediately after standby mode without booting ... Receiver is turned on
Both my x2 receivers boot up by themselves but I can't see where this would cause any issues.
Looks like the feed change some data and now working and finish the scan without problem. if happens again would tell it. thanks.Quote:
Originally Posted by Costactc [Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
I could be wrong but I think there was 1 firmware version in 2012 that did thatQuote:
Originally Posted by tabriz [Only registered and activated users can see links. Click Here To Register...]
If possible, the new software can solve this problemQuote:
Originally Posted by dr.zin [Only registered and activated users can see links. Click Here To Register...]
Thank you:bigthumbup:
i think all nt78326 based receivers boot that way(full boot)