Discuss this Topic here.
X2-Premium-III-SW-10NOV-2014 Notes:
solved USALS issues, update software
Printable View
Discuss this Topic here.
X2-Premium-III-SW-10NOV-2014 Notes:
solved USALS issues, update software
Internet update is still not working with my x2 III. It still is showing the Oct 16 file as the latest.
Same here bro, I updated from USB.Quote:
Originally Posted by Costactc [Only registered and activated users can see links. Click Here To Register...]
My backup would not load either, said wrong file or something along those lines, so I had to scan all over again.
I have not seen anyone else mention this so don't know for sure if it's just me with a bad backup file or this new firmware.
I also noticed that Live and Iptv are not functioning as well.
Weather isn't functioning. I attempted to add a city 2 times and both times it didn't retain it. When you press upgrade it says there is no network but I'm connected and then it says no cities.
IPTV and weather are okay for me..maybe try a hard boot and see if that helps at all.
I'll give it a shot because all internet functions seem to be not working.
Hard boot did the trick, all internet functions are a go.
Good stuff Costa, I have found I have to do that here and there, even when it say's connected.Quote:
Originally Posted by Costactc [Only registered and activated users can see links. Click Here To Register...]
Does this receiver have on and off switch in rear?
Yes it has the rear rocker switch...here's a picture of the rear.Quote:
Originally Posted by jdelanos73 [Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
Thank you VIP3R
I have loaded the new firmware and have built up a database of European satellites.
I have made the following observations:
blind scan is pretty good and tuner sensitivity about the same as my Dr.HD D15
The database of channels stable
I have got around the inability to scan frequency sections on universal lnbs by creating 2 dummy satellites High and Low.
The channel menu pop up when pressing ok at any channel is too transparent making it difficult to read. In transponder view misses out if the transponder is Horizontal or Vertical.
I cannot find a way to edit a transponder once created and the signal bar does not reflect the transponder you are editing making fine adjustment of frequency to find a lock tricky.
It would be less confusing if the satellite selected (blue heart) would default to that selected in the satellite list. I have found fine tuning of the positioner on my largish dish tricky as I have to reselect the satellite I am viewing before I can fine tune the dish
Using DiSEqC 1.2 is functioning as expected.
I have not tried the internet functions yet in this updsted software.
Overall, this receiver can be potentially up there with best with a little honing.
Hi AndyX
Thanks for your review. For the part of the TP edit go to Menu, Inst, Manual Scan, scroll down to the symbol rate, hit INFO on the remote control, the TP list will pop up, highlight the TP to change and hit the RED boton on the remote to edit. Make changes as you want and finally save it.
Can anyone tell me how to get the keyboard to pop up when trying to edit channel names. Hard to do with the remote, No alpha on the remote keypad. Thanks..
Thanks for that. Not the most intuitive software design but I an glad it is actually there.
Hello MarvQuote:
Originally Posted by Marv [Only registered and activated users can see links. Click Here To Register...]
The keyboard pop up option is not in this software. The lack of the alphanumerical lettering in the RC was identified since day one. I was told it was going to be added in all RC future orders. Thanks
yes did have the switch
On the subject of channel editing, was anything changed with the Nov 10 FW in regard to that?
I helped a friend set up his X2 Premium III and spent limited time with it. One thing I noticed if trying to edit the channel names with the remote was that it stated "Out Of Range" when trying to modify scanned channels. Anyone run into that?
At the time we tried the Oct 8 and 16 FW I downloaded for him.
Do the upgrade, try it and let us know!! :thumbup:Quote:
Originally Posted by Silverado5150 [Only registered and activated users can see links. Click Here To Register...]
Hello carlospr43, Can you tell me how to go about getting the updated RC? Thanks..
Morning MarvQuote:
Originally Posted by Marv [Only registered and activated users can see links. Click Here To Register...]
I was told a new batch will be run with alphanumerical RC, but nothing yet. Will keep you posted if they show up.
I'll wait to hear from you. I found that in the satellite list if you pick a satellite and click the red edit button and then ok you get a popup keyboard. I would think there would be a way to make this work in the edit menu.:confused:
Will pass this new info on.Quote:
Originally Posted by Marv [Only registered and activated users can see links. Click Here To Register...]