Need help does anyone know what to check on my sv 4000 was working before I put it up in closet . Hook it back up and no video ?
Help Please
Printable View
Need help does anyone know what to check on my sv 4000 was working before I put it up in closet . Hook it back up and no video ?
Help Please
Mine has been in the closet for over 3 years as well. Are you sure your wires are hooked up properly, component or composite?
For sure been installing satellites for 25 years, glad for the help.
Most of these units were used for hack back in the n2 days, you may need to revert back to the original fw that this stb came with. Your welcome by the way. This should get your sv back to normal:
[Only registered and activated users can see links. Click Here To Register...]
Are you saying to flash it ,Because all I have is a black screen ?
that is no menu or any video
Does the receiver show any signs of having power connected? Is there 14/18 volts coming out of the lnb port?
everything comes up on display and i download factory ,but it still no video
I checked the volts 14-18.5
OK.
This is what I understand: The display works, the lnb voltage is OK and you can see the receiver's menus.
What satellite are you aimed at and what lnb are you using?
BTW, I need to know if you can or cannot see the receiver's menus. I am confused on whether you can or can't see the menus.